Quick Start Guide

ManualsBrandsVitek ManualsDigital Video Recorders16 Channel 5 Megapixel Hybrid 5-In-1 HD-TVI / AHD / CVBS / IP Digital Video Recorder, 4TB

Installation

SpireHD Quick Start Guide

VT-SHP5016AN

16 Channel SpireHD Series Real-time CVBS / HD-TVI /

AHD and IP Digital Video Recorders

Visit www.vitekcctv.com for the latest updates

inluding: Product Information, Software, Firmware,

and Literature. FULL MANUAL available here:

•

FRONT PANEL

•

REAR PANEL

No. Name Description

VIDEO IN Video input terminal for cameras.

AUDIO IN Port for audio input.

AUDIO OUT Port for speaker connection.

ALARM IN Alarm input signal port.

ALARM OUT Alarm out signal port. O.C. (Pulled up to 5V via 10KOhm)

REL AY Relay Terminal output port.

RS485 Ports for communication with external devices such as PTZ camera and system keyboard.

RS232 Connection ports for signal cables to external devices such as PTZ camera, POS and ATM devices.

SPOT OUT Exclusive port for SPOT output only. (Connect to a TV monitor.)

VGA VGA monitor video output port.

HD-MONITOR HD monitor video output port.

e-SATA Connection port for external eSATA storage.

USB Used for connecting USB storage or mouse.

WAN(UPLINK) Network port for connection to the Internet, router or hub.

LAN(DOWN LINK)

Port for connecting the dedicated network device.

Do not share it with other devices.

DC12V Power input port.

MONITOR

VGA

AUDIO

OUT

DC12V

WAN(UPLINK)

LAN(DOWNLINK)e-SATA

USB

SPOT

OUT

RS-485_1

ALARM OUT

RS-485_2

D+

D-

GND GND

RX TX

AO5 AO1

AO6 AO2

GND GND

AO7 AO3

AO8 AO4

RS-232

RELAY

NO7

NO5

COM7 COM5

COM8 COM6

NC8 NC6

IN13 IN9

IN14 IN10

GND GND

IN15 IN11

IN16 IN12

GND

PANIC

RELAY

NO3

NO1

COM3 COM1

COM4 COM2

NC4 NC2

IN5 IN1

IN6 IN2

GND GND

IN7 IN3

IN8 IN4

GND

ARI

1 3 5 7 9 11 13 15

2 4 6 8 10 12 14 16

VIDEO IN

AUDIO IN

9 11 13 157531

10 12 14 168642

B C DE

A F G H I KJ

Summary of content (4 pages)

PAGE 1
SpireHD Quick Start Guide VT-SHP5016AN 16 Channel SpireHD Series Real-time CVBS / HD-TVI / AHD and IP Digital Video Recorders •FRONT PANEL Visit www.vitekcctv.com for the latest updates inluding: Product Information, Software, Firmware, and Literature.
PAGE 2
•LOG IN •LIVE SCREEN Video Window Quick Menu Time line Getting Started 1. When the system starts, the login screen appears. 2. Select the user ID and enter the password. The default user ID is “ADMIN”; the default password is “1234”. 3. Click . Status Bar • For safe and secure use of the product, change the password after purchasing. •STATUS BAR Item BESIDES THE REMOTE CONTROL BUTTONS, YOU CAN ALSO USE THE BUTTONS ON THE BOTTOM STATUS BAR TO CONTROL THE DVR.
PAGE 3
•AUTOMATIC RECORDING SETTING • ALARM RECORD : Recording will proceed only if an alarm event occurs. • MOTION/ALARM RECORD : Recording will proceed only if motion is detected or an alarm event occurs. Recording • INTENSIVE MOTION RECORD : Recording will be performed in a low quality. However, the quality will switch to high if motion event is detected. 1. 4 Press [MENU] on the remote control, and use the direction buttons to select and press [ENTER].
PAGE 4
5 •NETWORK CONNECTION •ACCESSING WITH THE BROWSER Network Setting 1. Broadband router or hub Open the browser and enter the IP address of the DVR, or enter the URL address in the address bar. ex) If using the DDNS: http://00115f123456.dvrlink.net:8080 If using an IP address: http://192.168.0.210:8080 For more information about the router and network settings, refer to the user manual of the respective product. Local PC 2. Local PC When the login dialog appears, enter the user name and password.