User Manual

Installation
10
|
Installation
4.
Once the HDD bracket is separated from the main
unit, remove 4 screws on both ends of HDD bracket to
separate the HDD from the bracket.
5.
Install a new HDD and fasten 4 screws back to both
ends of the bracket to secure.
When installing HDD, make sure to install in the correct
direction.
6.
Push the bracket installed with new HDD back into the
main unit until it is completely inserted.
7.
Assemble the front panel back to the unit.
J
When assembling the front panel to the main unit, make
sure the marked part is tightly attached.
8.
Fasten 2 screws on both ends of the main unit.
DVR Assembly
Direction