Manual

Transcendent Series: VMS for Mac OS X
17
4.2 Add or Remove the Camera Group
① Select a group and click button to enter
the interface. Then click “Add or Remove the
Camera Group” to pop up the window as shown on
the right.
② Check cameras on the left and click button to
add the selected cameras to the group on the right.
③ Check cameras on the right, then click button
to remove them from the group.
4.3 Create, Change or Delete Group Dwell Scheme
Scheme is used for dwelling group by group. Therefore,
at least one group should be created. Click “Change or
Delete the Group Dwell Scheme” on the left side of the
menu to enter the interface as below.
4.3.1 Create Scheme
Click button to create a scheme. The
added scheme will be displayed in the scheme list.
4.3.2 Change and Delete Group Dwell Scheme
Select a scheme in the scheme list, click button
to delete it.
Select a scheme and click button to enter
the interface. You can change the name of scheme and the
dwell time interval.
Select a scheme and click button. Then
click “Add or Remove Group of the Scheme” to enter the
interface.