Manual

Transcendent Series: VMS for Mac OS X
30
7.4.1 Alarm Preview Configuration
 Motion Detection Alarm: In the control panel, click “Change Camera Settings” under Device to enter the
interface. Select a camera, and then click “System trigger” shortcut under Motion Detection Alarm Settings to pop
up a window; click 【Trigger the Big Screen】 button under system linkage to select channel.
 Video Loss Alarm: Click “Video Loss of System” to enter the interface; click 【Trigger the Big Screen】
button under System Linkage to select channel.
 Sensor Alarm: In the control panel, click “Alarm Management” to enter the interface. Click “Set the Alarm
Trigger” button to add the associated preview cameras.
In the control panel, click “ Change Alarm Preview Settings”
under Live Preview to pop up the window
① Alarm preview will pop up automatically on an alarm if
checking “Automatic Pop-up Alarm Page”.
② Choose the number of screen.
7.4.2 Alarm Preview
After configuring the alarm, the alarm preview will automatically pop up if the alarm of selected channels is
triggered. The default pop-up window of system is independent interface.