Instruction manual

SAGA “XL” Series
94
1. RECORD PROGRAM
There are 10 available record programs, from program 0 through program 9, where
program 0 reflects the QUICK SETUP settings. Each program can be customized
and executed from RECORD SETUP. Please see 4.7 BASIC RECORDING under
IV. BASIC OPERATION section on page 41 for the default settings for each program.
2. IMAGE SIZE
The DVR is capable of recording in three different
resolutions: CIF (360 x 240), Half D1 (720 x 240)
and D1 (720 x 480).
Note: The resolution can be configured
independently per groups of cameras if necessary
as shown in the illustration to the left.
3. NORMAL RECORD RATE
Normal Record configures the recording speed for each channel for manual
(continuous) recording. When manual recording is activated, every channel will
record as defined by user or preset settings.
The maximum total recording rate per resolution is 480PPS in CIF, 240PPS in Half
D1 and 120PPS for D1 for the VT-XL1680 and 240PPS in CIF, 120PPS for Half D1
and 60PPS in D1 for the VT-XL840.
The recording rate is further divided in groups of
four channels, where the maximum recording rate
for each group is 120 in CIF, 60 in Half D1 and 30
in D1.
Note: The illustration on the left shows the
maximum total allowed per resolution and per
group, as group A’s total is 120 in CIF, group B’s
total is 60 in Half D1 and Group C’s total is 30 in
D1 resolution.
4. EVENT RECORD SETTING
The DVR offers two distinctive methods for recording events: SINGLE mode versus
COMPLEX mode. Furthermore, both modes offer EVENT CHANNEL only and ALL
CHANNELS mode for a total of four possible event recording options.