VTC-C750WDR Wide Dynamic Range Color CCD Camera w/550TVL VITEK • Wide Dynamic Range 1/3" Color DPS Pixim Image Sensor • 550 TV Lines of Resolution • OSD (On Screen Display) for Camera Function Setup • True (ICR) Day/Night Function • 0.0002 Lux Sensitivity (F1.
VTC-C750WDR WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. The symbol is intended to alert the user to the presence of important operating and maintenance(servicing) instructions in the literature accompanying the unit. The symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
VTC-C750WDR Table of contents 1. Safety Instructions and Notes…....................................................................................................... 4 2. General Descriptions............................................................................……………………………... 5 3. Supplied Items......................................................................................……………………………... 5 4. Part names…………………………….…...................................................…………………………... 6 5.
VTC-C750WDR 1. Safety Instructions and Notes • Please read these safety and operating instructions before putting the camera into operation. • Keep the operating instructions in a safe place for later use. • The Standard Box Camera is designed for indoor use only and it must not be installed where exposed to rain and moisture. • Do not operate the cameras beyond their specified temperature, humidity or power ratings. • Never open the case of the camera because there are precision parts inside.
VTC-C750WDR 2. General Descriptions VTC-C750WDR (VTC-C750WDR/PAL for PAL)) is a superb wide dynamic range camera which achieves 120dB max(102dB typical) of dynamic range of the image by implementing PIXIM's DPS(digital pixel system) CMOS SENSOR. With CMOS image sensor, - Provides the best quality image without any blooming or vertical smear even under the spot light.
VTC-C750WDR 4. Part Names 4.
VTC-C750WDR 4.2 Rear side view ⓑ ⓐ ⓒ ⓓ ⓐ OSD menu switches (Up/ Down/ Left/ Right / Enter) ⓑ Video Output Connector (BNC) ⓒ Power indicator LED ⓓ Power Input Terminal 5. Installation and commissioning Instructions • Make sure the power is removed before the installation. • Follow the order for applying power. First connect the low voltage (DC12V or AC24V), then plug the AC adapter to AC outlets to avoid an improper reset from power jitter and a damage from the surge voltage when no load. 5.1.
VTC-C750WDR 4. 5. 6. 7. Loosen ④ Back focus Adjustment Lock Screw one~two turns on the camera with industrial “+” driver Rotate ① Back Focus Adjustment until the optimum focus is achieved. Tighten ④ Back focus Adjustment Lock Screw again. Trim the focus precisely at lens if necessary. Setting for lenses with a variable focal distance (zoom) If the focus changes as the focal distance changes, please proceed as follows. 1.
VTC-C750WDR 7. SETUP Menu 7.1 In the menu , buttons to move menu, Use to select or enter. , buttons to change the settings and press button short button stands for MENU or ENTER button. 7.2 Entering menu Press button longer than 2 sec on the back of camera. 7.3 PRESET menu PRESET menu is provided to help the settings with the possible parameters obtained and assumed by the factory tests for the most common environments. PRESETs may not be the best optimized settings for the actual installations.
VTC-C750WDR 7.4 EXPOSURE menu EXPOSURE menu is provided to help the settings with the possible parameters obtained and assumed by the factory tests for the most common environments. EXPOSURE presets may not be the best optimized settings for the actual installations. In such cases, find the optimal settings in CUSTOM setting of EXPOSURE menu EXPOSURE Descriptions Medium level of the dynamic range control for each PRESETs. WDR HIGH Increases the dynamic range control.
VTC-C750WDR WDR CUSTOM Descriptions WINDOW Metering of the dynamic control is weighted to the selected window from SAFE AREA, ZONE ADJUST, CENTER 1/3 AND LOWER 2/3. RANGE Adjusts the strength of the dynamic range control. BIAS Adjusts the base level of the dynamic range control. 7.6 ZONE ADJ menu Adjusts the size and the location of the metering zone for the dynamic range control. Dynamic range control is very sensitive to the size and the location of the zone. The default window size is SAFE AREA.
VTC-C750WDR 7.8 DAY / NIGHT menu DAY/NIGHT Descriptions IR Cut filter is switched OUT/IN at night/day time automatically. At night mode, camera outputs the B/W video without the color burst signal. OFF IR Cut filter is stuck and is NOT switch OUT. 7.
VTC-C750WDR 7.10 SHUTTER LIMIT menu SHUTTER LIMIT Descriptions <2X ESS > The longest shutter is limited to 2X of 1/60(NTSC)/1/50(PAL) sec when the scene illumination becomes dim. Video refresh rate at 2X ESS is 15(NTSC)/12.5(PAL)frames/sec. 4X ESS ~ 32X ESS The longest shutter is limited to 4X~32X of 1/60(NTSC)/1/50(PAL) sec when the scene illumination becomes dim. The higher integration increases the sensitivity but decreases the video refresh rate. 7.
VTC-C750WDR 7.12 MANUAL WHITE BALANCE menu (in PITURE CONTROL menu) button at of WHITE BALANCE menu. To enter MANUAL WHITE BALANCE menu, press Shoot a white paper or a gray card and adjust either KELVIN or R/B so that the color on the monitor becomes most white. 7.
VTC-C750WDR 7.14 LENS SELECT menu DC auto iris lens or MAUAL lens can be used for this camera but DC auto iris lens must be used in FL-LIGHT and EFR presets and strongly recommended in other presets when the scene is very bright. 7.15 VIDEO SYNC menu VIDEO SYNC Descriptions Synchronization is INTERNAL regardless of the power source. INT2 Synchronization is INTERNAL but sync frequency is modified to simulate line-lock. It is not actually synchronized to the line frequency.
VTC-C750WDR 7.16 SAVE / RESTORE / EXIT menu MENU-2 Descriptions SAVE AND EXIT Exits menu after saving the parameters. EXIT NO CHANGES Exits menu with discarding any changes. RESTORE FACTORY SETTINGS Restores and saves all parameters of factory settings. Camera resets and restarts automatically. LANGUAGE English is available only. Language does NOT change by RESTORE FACTORY SETTINGS. VIDEO STANDARD NTSC and PAL can be switched.
VTC-C750WDR 8. Specifications Model name VTC-C750WDR VTC-C750WDR/PAL Image Device 1/3" RGB Color DPS SENSOR (Pixim Orca D1500series) Effective Pixels 720(H) x 540(V) TV system NTDC, 525lines / 2:1interlace PAL, 625lines / 2:1interlace Scan frequency. 59.94Hz(V), 15.734Khz(H) 50Hz(V), 15.625Khz(H) Synchronization Internal/Line lock (Default: Internal) H. Resolution 550 TV Lines Sensitivity 0.0002Lux(F1.
VTC-C750WDR 9.
VTC-C750WDR 10.
28492 CONSTELLATION ROAD VALENCIA, CA 91355 WWW.VITEKCCTV.
