VTC-HOCRAZ39/922 2.1MP HD-SDI Compact Indoor/Outdoor WDR True Day/Night Dome Camera VITEK FEATURES: • 1/2.9” Sony® CMOS • 2.
Safety Precaution To prevent fire or shock hazard, do not expose the unit to rain or moisture. To prevent electric shocks and risk of fire hazards, do NOT use other than specific power source. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Safety Precaution NOTICE The image used in this instruction manual are processed to help comprehension and may differ from actual video of the camera. Avoid installing in areas where shock or vibration may occur. Pay attention to safety when installing the connection cable and observe that the cable is not subjected to heavy leads, kinks or damage and no moisture can get in. Never open the device such as boards or lens. The warranty becomes void if repairs are undertaken by unauthorized persons.
Contents p. 02 - 03 Safety Precaution Optional Dome Mounts p. 04 Contents p. 05 - 06 Features p. 02- 03 Package Includes p. 07 Dimensions p. 09 Part Names p. 09 - 11 Installation Instructions p. 12 - 25 Operating Instructions p. 26 Specifications p.
Features Key Features ¥ Full HD, 2Mega Pixel HD-SDI CAMERA, 1920x1080(30p/25p) ¥ True WDR(Wide Dynamic Range) Improved Noise reduction with the enhanced 3D-NR ¥ VTD-HOCRAZ39: f=3~9mm, F1.2~F2.1 Day&Night zoom lens (Optical 3x Auto focus zoom / Digital 32x zoom) VTD-HOCRAZ922: f=9~22mm, F1.6~F2.3 Day&Night zoom lens (Optical 2.4x Auto focus zoom / Digital 32x zoom) ¥ Focusing Status Indicator on Screen - ★(Blue) Focusing in process - ★(White) Focusing Completed Dual Filter Switching M.A.P.
Features General Description This camera realizes the natural and crisp image as you see the scene in front of you by adopting Auto Focus Full HD(1920x1080p) camera module.
Dimensions (unit: inches) 5.5 4.7 4.7 3.2 3.9 2.7 1.5 See Optional Dome Mounts (pg. 3) 4.0 5.5 PCD 4.7 3-0.
Part Names CONDUIT SPACER (Option) CONDUIT HOLE CAP POWER AND VIDEO CABLE (Option) SURFACE MOUNT (Option) OSD CONTROL JOY STICK FLUSH MOUNT 3-AXIS GIMBAL ZOOM LENS SAFTY WIRE DOME COVER BUBBLE DOME 8
Installation Instructions 1. Locate the mounting template at the installation position and drill the ceiling or wall if needed. 3 2. Open the dome cover by loosening screws(4x12mm). Use the torque wrench supplied. A. Flush mount type: See Optional Dome Mounts (pg. 3) - Place the dome base unit on pre-drilled position and attach using mount. ing screws (4x30mm). - Route the Power cable to the connecting place. B. Surface mount type (Option): See Optional Dome Mounts (pg.
Installation Instructions Limit of pan & tilt 1) Pan limit: Pan is limited to +/- 165°. Do NOT force the gimbal over the limit, this will prevent internal damage. 2) Tilt limit: Tilt is limited to 15° min ~ 90° max. with reference to the ceiling when the inclination of camera module is 0°, that is, the image is aligned horizontally. 3) Inclination limit (Horizontal image alignment): Inclination limited to +/-60° max.
Installation Instructions Power Supply Connections Make sure the power is removed before installation. Camera can work with either 24VAC or 12VDC, dual voltage power.. Primary and secondary grounds are completely isolated to avoid the possible ground-loop problems. In case that HD-SDI Inputs are not supported by Monitor, please use HD-S DI Converter to connect HD-SDI cable with Monitor Some computer monitors or TVs may not support 30p/25p. Please check Specification of Monitor before installation.
Operating Instructions Using OSD controller Setup menu can be accessed and controlled by OSD control joy stick on the side of camera unit. Five commands are available with the joy stick. The design of OSD could be different according to the Model.
Operating Instructions OSD menu Start up Press ☟’(OSD menu SET key) down to access the setup menu mode. Lens Initializing is strongly recommended at the first stage of setup menu control. ZOOM/FOCUS > LENS INIT > Press the joystick ☟’straight down for about 2 seconds. MENU 1. ZOOM/FOCUS 2. EXPOSURE 3. SCENE ENHANCE 4. 3D-NR 5. DAY/NIGHT 6. PICT ADJUST 7. SPECIAL 8. SYSTEM 9. EXIT V3.
Operating Instructions SCENE ENHANCE 3D-NRM DAY/NIGHT NORMAL ID EXT for IR LED AUTO for No IR LED BLC — Improves the visibility of dark objects caused by bright back light. Outside area of BLC window can over saturate. BLC has a target window for compensation and its size and position can be set by H-POS, V-POS, H-SIZE and V-SIZE. . HLC — Cuts out the highlight area with a black mask and excludes it from compensation. Lower HLC LEVEL the more sensitive it is to bright light.
Operating Instructions 1. ZOOM/FOCUS ZOOM / FOCUS FOCUS MODE D-ZOOM LENS REFRESH LENS INIT. RETURN ZOOM PUSH OFF OFF ON RET 1-1. FOCUS MODE (default: ZOOM PUSH) : ZOOM PUSH, AUTO and MANUAL modes are available for focusing. 1-2. D-ZOOM (default: OFF) : D-ZOOM(Digital zoom) is available up to 32x. D-ZOOM starts working when the optical zoom reaches its maximum tele-position. Zoom ratio is displayed on the right bottom corner of the monitor if SPECIAL>DISPL A Y>ZOOM RATIO is set to ON. 1-3.
Operating Instructions CAUTION • It is necessary to execute LENS INIT in cases below; 1) At the final step of installation. 2) When out of focus due to shock or vibration. 2. EXPOSURE EXPOSURE MODE BRIGHTNESS SENS-UP AGC MOTION DEBLUR RETURN AUTO |:::::::|::::::| 10 OFF |:::::::|::::::| 12 ON RET 2-1. MODE (default: AUTO) : Can set EXPOSURE MODE to AUTO, IRIS Priority, SHUT. Priority, MANUAL and Flickerless. SHUT. Priority, MANUAL and Flickerless modes disable SENS-UP and MOTION BLUR functions.
Operating Instructions 2-3. SENS-UP (default: OFF) : A brighter video can be obtained by increasing the exposure time at night with SENS-UP. SENS-UP is the maximum integrations of frame by DSS (Digital Slow Shutter) in low light. . • AUTO: SENS-UP is enabled or disabled automatically by the scene brightness. Higher SENS-UP can get brighter video but the slower frame rates will cause motion blur and more white pixels.
Operating Instructions 3-2. SHARPNESS (default: 10) : Adjusts the sharpness of video. 3-3. COLOR GAIN (default: 10) : Adjusts the color level of video. 3-4. GAMMA (default: 0.5) : Adjusts the gamma of video. 4. SPECIAL SPECIAL MIRROR/FLIP PRIVACY MOTION PIXEL DEFECT TITLE SET DISPLAY DEFOG POINTING ZOOM RETURN OFF OFF OFF OFF RET 4-1. MIRROR/FLIP (default: OFF) : Reverses the video left and right and/or up and down by MIRROR/FLIP. ¥ OFF : Normal display without mirroring or flipping ¥ Hor.
Operating Instructions 4-3. MOTION (default: OFF) : MOTION can detect the changes in the motion window and displays the results in blocks and/or a text message. • SENSITIVITY : Adjusts the detection sensitivity for motion. Higher value increases the sensitivity to detect small motion easier. Too low of sensitivity will cause erratic detection. • H-POS,V-POS, H-SIZE and V-SIZE Adjust the size and position of the detection window. • BLOCK DISP : ON enables to display the blocks for the detected area.
Operating Instructions choose a character and ☟’selects it. The selected characters are added and displayed on the top left Corner and the cursor moves right automatically for next input. 4-6. DISPLAY : Enables or disables the OSD display. • ID : ON enables camera ID display defined by SYSTEM>COMM. SETUP>CAM ID. . • TITLE : ON enables camera ID display set by SPECIAL>TITLE SET ¥ ZOOM RATIO : ON enables to display the zoom ratio on the bottom right corner. OZx.x appears during the optical zoom and DZx.
Operating Instructions UNLIKE the conventional zoom which can zoom in/out the center area of image only, the flexible zoom location and area, SMART MOTION ZOOM differentiates its usefulness from others. That is, a conventional camera installed in the corner of the ceiling can zoom the center of the floor in a room and result in losing the image of a door on the side wall. However, SMART MOTION ZOOM can be set to see the door side and zoom in that area without missing the IMPORTANT security point.
Operating Instructions POINTING ZOOM This camera has a very useful and powerful feature, POINTING ZOOM, which can zoom in/out any area. POINTING ZOOM enlarges the area defined by a yellow window to a full size image when motion is detected in the black window. POINTING ZOOM window can be re-sized by adjusting D-ZOOM RATIO and moved by H-POINTER and V-POINTER.
Operating Instructions *Example of Smart Motion and Pointing Zoom Features 23
Operating Instructions 5. SYSTEM SYSTEM TV SYSTEM RESOLUTION COMM. SETUP LANGUAGE FACTORY DEFAULT RETUTN EU(PAL) 1080P ENG☟ NO RET 5-1. TV SYSTEM (default: US or EU) : Selects HDTV standards for US(60HZ) or EU(50HZ). By this selection, 2nd analog video output switches to NTSC or PAL accordingly. 5-2. RESOLUTION (default: 1080P) : Three resolutions,1080P/720P(SCALED)/720P(CROPPED) are available. 1080P outputs 1920x1080 video at the frame rate of 30P/25P.
Operating Instructions TIP Setting for RS-485 Communication with PTZ Controller NEAR 25 FAR
Detailed Specifications VTD-HOCRAZ39 VTD-HOCRAZ922 1/2.9” Sony® CMOS Sensor 2.1 MegaPixel (1080p / 720p) Resolution More than 50 dB (AGC Off) S/N Video Output 1x HD-SDI (BNC) / 1x SD CVBS (BNC) IR Illuminators 2 High Power IR LEDs IR Color Temp. 850nm 80’ IR Range YES Dynamic Intensity IR LEDs Lens Auto Focus Zoom MegaPixel IR Corrected 3-9mm Varifocal Zoom MegaPixel IR Corrected 9-22mm Varifocal Zoom YES - 3x Smart Motion Zoom YES - 2.
Other Products From VITEK On Cue HD-SDI Video Recorders VT-HDOC Series On Cue Series 4, 8, & 16 Channel HD-SDI Video Recorders • 4, 8, or 16 Channel HD-SDI Inputs (Universal) with Full1080p, 720P, 960H & D1 Camera Support • Simple plug and play, point-to-point connection from camera to DVR • Pentaplex Operation (Multi-Channel Live-View, Playback, Recording, Backup, Network) • VT-HDOC16: 480fps Live Display, Recording & Playback at 720p/1080p • VT-HDOC8: 240fps Live Display, Recording & Playback at 720p/10
LIMITED LIABILITY WARRANTY VITEK products carry a three (3) year limited warranty. VITEK warrants to the purchaser that products manufactured by VITEK are free of any rightful claim of infringement or the like, and when used in the manner intended, will be free of defects in materials and workmanship for a period of three (3) years, or as otherwise stated above, from the date of purchase by the end user.
