Specifications

ENVI Series: VTC-IR40-N
131
The recording feature is already enabled and recording conditions are configured in default settings. In
the example shown above, you can see that Camera 1 of Device 0 will record video only when motion is
detected. ClickOK to use this Recording Conditioned.
To change recording condition high light camera 1 under condition list (A)
Select the type of Recording under Condition Mode (B)
If schedule recording is enabled, the schedule section will be available to configure (C)
If Event is selected the event section will be available to configure (D)
After conditions are selected click Apply to condition(E)
After apply to condition click Apply to camera(F)
Click OK when done.