Specifications

ENVI Series: VTC-IR40-N

13.5. Bandwidth Control Configuration

Bandwidth control is for limiting maximum network traffic. If it is enabled with Bandwidth limits,

maximum data size transferred from VITEKcameras won’t exceed bandwidth limits set by users. If

transferred data is exceeded, part of the data will be randomly lost.

If multiple users try to access a VITEKcamera when bandwidth control is enabled, users connected

to the VITEKcamera will share network bandwidth limit.

13.6. View Network Status

This menu shows network status of VITEKcameras.

Note: This bandwidth control feature works well in M-JPEG video transmission. But, for

H.264, dropping data packets may cause low quality of video, so it is

recommended to utilize CBR and frame rate control instead of bandwidth control

for H.264 video.Refer to

Section14.2

Camera & Motion

on page 52

for more

info on CBR and Frame rate.

Note: Network Bandwidth control is managed by theVITEKcamera and it drops any data

packets if required, thus you may experience slow connection when this feature

is enabled.