Alpha Series Indoor WDR Dome Cameras VITEK • 650 TV Lines of Resolution • 1/3” Sony SuperHAD II CCD • Hercules II DSP Engine • 3.6mm Fixed and 2.
TABLE OF CONTENTS BOX CONTENTS / MOUNTING ACCESSORIES 2 AVAILABLE MODELS 3 VTD-A4F/I INSTALLATION 4 VTD-A2812/I INSTALLATION 5 VTD-AR2812/I INSTALLATION 6 INSTALLATION TIPS 7 OSD OPERATION 8-27 DIMENSIONS 28 SPECIFICATIONS 29-31 1
BOX CONTENTS 1) AlphaCONTENTS Dome Camera BOX CONTENTS BOX 2) Mounting Accessories 1)Secondary DomeCamera Camera 1) Dome 3) Video Output Cable 4)2)This instruction Manual & Mounting Template Mounting Accessories 2) Mounting Accessories 3)This Thisinstruction instructionManual Manual&&Mounting MountingTemplate Template 3) MOUNTING ACCESSORIES BOX CONTENTS CONTENTS BOX Self Tapping Screws For attaching the housing base to a Self TappingScrews Screws Self Tapping solid surface.
AVAILABLE MODELS VTD-A4F/IW Indoor High Resolution WDR Dome Camera with White Base. VTD-A4F/IB Indoor High Resolution WDR Dome Camera with Black Base. VTD-A2812/IW Indoor High Resolution WDR Varifocal Dome Camera with White Base. VTD-A2812/IB Indoor High Resolution WDR Varifocal Dome Camera with Black Base. VTD-AR2812/IW Indoor High Resolution Infrared WDR Varifocal Dome Camera with White Base. VTD-AR2812/IB Indoor High Resolution Infrared WDR Varifocal Dome Camera with Black Base.
VTD-A4F/I INSTALLATION * See Installation Tips on page 8 4 BLACK
VTD-A2812/I INSTALLATION * See Installation Tips on page 8 5
VTD-AR2812/I INSTALLATION * See Installation Tips on page 8 6 BLACK
INSTALLATION TIPS 1.) Power Consumption - Amperage/Voltage It is of utmost importance that the proper Voltage and Amperage is used when applying power to your VITEK Alpha Series Dome Camera. They can be powered by either 12V DC or 24V AC (except for the model VTD-A4F/I - 12V DC only). Always use a UL Listed power transformer. The Amperage must be measured at the camera location. It is very important that the camera receives no less than the required Amperage or it will be “Starved” and eventually die out.
OSD OPERATION SETUP MENU EXPOSURE LENS AGC SENSE-UP WHITE BALANCE AWB MODE R-Y GAIN B-Y GAIN RETURN DAY&NIGHT D&N MODE BURST C_SUP A_SUP DYNAMIC IR RETURN IMAGE ADJUST MIRROR SHARPNESS GAMMA LSC MONITOR RETURN MOTION MOTION AREA SENSITIVITY DISPLAY HOLD TIME ALARM OUTPUT RETURN PRIVACY MASK1 MASK2 MASK3 MASK4 MASK5 MASK6 MASK7 MASK8 RETURN SPECIAL LANGUAGE TITLE COMMUNICATION DPC FACTORY SET RETURN BACKLIGHT 3D-DNR RETURN EXIT 8 BLACK
OSD OPERATION Push to Setup Secondary Video Output 9
OSD OPERATION MAIN MENU EXPOSURE WHITE BALANCE DAY&NIGHT IMAGE ADJUST MOTION PRIVACY SPECIAL EXIT 10 BLACK
OSD OPERATION EXPOSURE The EXPOSURE menus SHUTTER/IRIS controls, BLC, HLI, D-WDR, AGC and 3D DNR, will set SENSE-UP etc. and it will be able to change a condition. MAIN MENU EXPOSURE WHITE BALANCE DAY&NIGHT IMAGE ADJUST MOTION PRIVACY SPECIAL EXIT EXPOSURE LENS AGC SENSE-UP BACKLIGHT 3D-DNR RETURN DC DC HIGH AUTO OFF AUTO BRIGHTNESS E.SHUTTER RETURN 025 1/60 LENS EXPOSURE – LENS – DC DC modes use DC-IRIS lenses and they control AE. Then, electronic shutter speed default 1/60.
OSD OPERATION EXPOSURE LENS AGC SENSE-UP BACKLIGHT 3D-DNR RETURN MANUAL MANUAL HIGH AUTO OFF AUTO BRIGHTNESS E.SHUTTER RETURN 025 AUTO EXPOSURE – LENS Selection of LENS modes. The ELC means fixed LENS mode. The ELC modes with electronic shutter AE controls. When use DC-IRIS lens, DC-IRIS full open conditions. DC modes use DC-IRIS lenses and they control AE.
OSD OPERATION SENSE-UP/NIGHT WATCH DSS EXPOSURE LENS AGC SENSE-UP BACKLIGHT 3D-DNR RETURN DC HIGH AUTO OFF AUTO EXPOSURE – SENSE - UP When it is low dark condition, SENSE UP uses AUTO / OFF / X2 / X4 / X8 / X16 / X32 / X64 / X128 / X256 / X512 / X1024 AUTO mode basically sets X4 by manufacture. In case of SENSE-UP operating, the 3D-DNR is operated LOW l evel.
OSD OPERATION BACKLIGHT - BLC (Back Light Conpensation) EXPOSURE LENS AGC SENSE-UP BACKLIGHT 3D-DNR RETURN BLC DC HIGH AUTO BLC AUTO BLC - MANUAL BLC MODE BLC LEVEL RETURN MANUAL MID TOP BOTTOM LEFT RIGHT RETURN 005 010 005 010 EXPOSURE - BACKLIGHT – BLC – BLC MODE Select AUTO or MANUAL Sets the total AE level at AE value of select window area. AUTO, the case which modes will select seeks the darkest are a with automatic and photometry weight, AE controls does.
OSD OPERATION BACKLIGHT - HLC (High Light Conpensation) EXPOSURE LENS AGC SENSE-UP BACKLIGHT 3D-DNR RETURN HLC DC HIGH AUTO HLC AUTO HBLC HLC LEVEL MASK1 MASK2 MASK3 MASK4 RETURN HBLC - MANUAL MANUAL NIGHT 010 ON ON ON ON HBLC LEVEL TOP BOTTOM LEFT RIGHT RETURN EXPOSURE - BACKLIGHT - HLC It is a function which reverses the area about strong light. The HLI BLC mode control by BLC window area.
OSD OPERATION BACKLIGHT - WDR (Wide Dynamic Range) EXPOSURE LENS AGC SENSE-UP BACKLIGHT 3D-DNR RETURN WDR DC HIGH AUTO WDR AUTO SET LEVEL RETURN 010 16 BLACK
OSD OPERATION BACKLIGHT - 3D DNR (3Dimension Digital Noise Reduction) EXPOSURE LENS AGC SENSE-UP BACKLIGHT 3D-DNR RETURN DC HIGH AUTO OFF AUTO AUTO : Level sets for 3D DNR. OFF : 3D DNR function does not operate. OFF / LOW / MID / HIGH. The noise level reduces in high level but ghost image increase more. BACKLIGHT - RETURN Select this to save the changes in the menu and return to the MAIN menu.
OSD OPERATION WHITE BALANCE MAIN MENU EXPOSURE WHITE BALANCE DAY&NIGHT IMAGE ADJUST MOTION PRIVACY SPECIAL EXIT WHITE BALANCE AWB MODE R-Y GAIN B-Y GAIN RETURN MANUAL 128 128 WB-MANUAL M-WR M-WB RETURN 064 064 WHITE BALANCE - AWB MODE ATW : Auto Tracking White Balance mode MANUAL : User can change color M. WR : If it is higher than default (64), the white point moves toward RED. And it is lower than it moves toward GREEN. Control range : 0 ~ 128, 1 step, default : 64 M.
OSD OPERATION DAY & NIGHT MAIN MENU EXPOSURE WHITE BALANCE DAY&NIGHT IMAGE ADJUST MOTION PRIVACY SPECIAL EXIT D&N MODE DAY & NIGHT DAY & NIGHT D&N MODE BURST C_SUP A_SUP DYNAMIC IR RETURN AUTO AUTO OFF 020 020 AUTO DAY > NIGHT NIGHT > DAY DELAY TIME RETURN 042 035 010 DAY&NIGHT – D&N MODE - AUTO D&N is decided by AGC gain level. DAY>NIGHT: It controls gain level for changing Night mode ((DAY>NIGHT + 1) ~ 42, 1 step) unit dB. NIGHT>DAY: It controls gain level for changing DAY mode.
OSD OPERATION DAY&NIGHT – D&N MODE - COLOR : This picture is always displayed in color. DAY&NIGHT – D&N MODE - B&W : This picture is always displayed in black and white. You can turn on or off the burst signal on B/W mode. DAY&NIGHT – D&N – EXT DAY & NIGHT D&N MODE BURST C_SUP A_SUP SMART IR RETURN EXT EXT OFF 020 020 AUTO DAY > NIGHT NIGHT > DAY DELAY TIME RETURN 190 030 005 EXT mode: D&N decision by external CDS signal. DAY>NIGHT: ADC level for changing Night mode.
OSD OPERATION C_SUP / A_SUP DAY & NIGHT AUTO OFF 020 020 AUTO D&N MODE BURST C_SUP A_SUP DYNAMIC IR RETURN DAY&NIGHT – C_SUP The color noise suppress in Night mode / 0 ~100, 1 step. Unit %. DAY&NIGHT – A_SUP The Aperture level suppres in Night mode / 0 ~100, 1 step. Unit %. DYNAMIC IR Can adjust the display saturation as AUTO or OFF.
OSD OPERATION MAIN MENU IMAGE ADJUST EXPOSURE WHITE BALANCE DAY&NIGHT IMAGE ADJUST MOTION PRIVACY SPECIAL EXIT MIRROR SHARPNESS GAMMA LSC MONITOR RETURN OFF 015 0.45 OFF LCD MIRROR : Image change mirror ON/OFF mode SHARPNESS : Sharpness level control ( 0 ~ 30, 1 step) GAMMA User can adjust GAMMA level. Selecting of 0.45 / 0.60 / 1.0 / USER. After selecting USER mode, the gamma value adjust 0.20 ~ 1.0 0. (0.
OSD OPERATION The function informs alarm on camera when being moving by the screen. The setting zones are 4 area.
OSD OPERATION MOTION MOTION AREA SENSITIVITY DISPLAY HOLD TIME ALARM OUTPUT RETURN OFF 025 TRACE 003 OFF SENSITIVITY : Control MOTION sensitivity. (1 ~ 30, 1 step) DISPLAY: Control alarm mode when MOTION indicates. ( Select of OFF / MESSAGE / TRACE) i) MESSAGE mode: MOTION ICON display when MOTION indicates. ii) TRACE mode: Display selected window in AREA HOLD TIME: The time of alarm control when MOTION indicat.
OSD OPERATION PRIVACY MASK1 MASK2 MASK3 MASK4 MASK5 MASK6 MASK7 MASK8 RETURN PRIVACY OFF OFF OFF OFF OFF OFF OFF OFF MASK1 MASK2 MASK3 MASK4 MASK5 MASK6 MASK7 MASK8 RETURN MASK ON ON ON ON ON ON ON ON ON DOT SEL DOT XY MOVE XY COLOR RETURN L_TOP MAGENTA PRIVACY – MASK1 ~ MASK 8 The each mask selects ON/OFF PRIVACY – MASK After selecting each mask, it can select color, location, area of mask. DOT SEL : The each mask can change area.
OSD OPERATION SPECIAL LANGUAGE TITLE COMMUNICATION DPC FACTORY SET RETURN USER TITLE ENGLISH ON ON AUTO NO --------------------------- TITLE User writes TITLE / User sets TITLE ON/OFF. After selecting TITLE ON, it can write TEXT to diplay on screen. USER TITLE – Text setting mode / User can write text 64 charaters. ← , → : When it modify, user can move revision text.. CLR: User can remove all text. POS: The text move to the position. RET : After finishing USER TITLE to the upper menu.
OSD OPERATION DPC (Dead Pixel Conpensation) It is the function to compensate for CCD defect. User can se lect OFF / MANUAL. SPECIAL LANGUAGE TITLE COMMUNL CATION DPC FACTORY SET RETURN DPC AUTO ENGLISH OFF ON AUTO NO WHITE THR LUMA THR RETURN 150 030 DPC – MANUAL After selecting MANUAL mode, menu move to the DPC control mo de WHITE THR : White defect threshold. (0 ~ 255, 1 step) LUMA THR : Black defect threshold. (0 ~ 255, 1 step) FACTORY SET : Factory initial data mode set.
DIMENSIONS 3.75” (95.1mm) 4.6” (117mm) 3.18” (80.8mm) 1.4” (35.5mm) 4.6” (117mm) 3.29” (83.5mm) 5.44” (138.3mm) 3.67” (93.3mm) 1.8” (46mm) 1.59” (40.3mm) 5.44” (138.3mm) 3.29” (83.5mm) 5.44” (138.3mm) 4.23” (107.5mm) 1.8” (46mm) 1.59” (40.3mm) 5.44” (138.
SPECIFICATIONS VTD-AF4/I Image Device 1/3” Sony SuperHAD II CCD Resolution 650 TV Lines Min. Illumination 0.1 Lux at F1.2 (Color) / 0.0001 Lux (Sense up x256) Effective Pixels 811 (H) x 508 (V) 410K pixels S/N Ratio More Than 52dB (AGC Off) Shutter AUTO / MANUAL (1/60sec~1/100,000sec) White Balance ATW / AWC / PUSH / MANUAL (Adjustable) Standard Lens 3.6mm Fixed Lens Video Output CVBS: 1.
SPECIFICATIONS VTD-A2812/I Image Device 1/3” Sony SuperHAD II CCD Resolution 650 TV Lines Min. Illumination 0.1 Lux at F1.2 (color) / 0.0001Lux (Sense up x256) Effective Pixels 811(H) x 508(V) 410K pixels S/N Ratio More Than 52dB (AGC Off) Shutter AUTO / MANUAL (1/60sec ~ 1/100,000sec) White Balance ATW / AWC / PUSH / MANUAL (Adjustable) Standard Lens 2.8-12mm DC Auto Iris Lens Video Output CVBS: 1.
SPECIFICATIONS VTD-AR2812/I Image Device 1/3” Sony SuperHAD II CCD Resolution 650 TV Lines IR LEDs 35 IR LEDs at 850nm Min. Illumination 0 Lux (IR ON) Effective Pixels 811(H) x 508(V) 410K pixels S/N Ratio More Than 52dB (AGC Off) Shutter AUTO / MANUAL (1/60sec ~ 1/100,000sec) White Balance ATW / AWC / PUSH / MANUAL (Adjustable) Standard Lens 2.8-12mm DC Auto Iris Lens Video Output CVBS: 1.
OPTIONAL WALL MOUNT VT-AP/WMT Indoor ALPHA Series Wall Mount • Compatible with the ALPHA Series Indoor Dome Cameras • Available in Ivory or Black (VT-AP/WMT-W / VT-AP/WMT-B) 32 BLACK
EHL SERIES DIGITAL RECORDERS VT-EHL Series 4 & 8 Channel Digital Video Recorders with H.264 Compression H.264 Simplicity and reliability is the basis upon which the EH L Digital Video Recorder was conceived. With almost every powerful feature of its predecessor the “EH”, the EHL offers an economical option for providing the most advanced recording solution available. As part of the EH family, the EHL is completely compatible with all VITEK EH Platform application software.
NOTES 34 BLACK
VITEK LIMITED PRODUCT WARRANTY VITEK products carry a three (3) year limited warranty. VITEK warrants to the purchaser that products manufactured by VITEK are free of any rightful claim of infringement or the like, and when used in the manner intended, will be free of defects in materials and workmanship for a period of three (3) years, or as otherwise stated above, from the date of purchase by the end user.
