User Manual

10
.
Installation Instructions
CAUTION
15…
90…
Limit of pan & tilt
1) Pan limit:
Pan is limited to +/- 165°. Do NOT force the gimbal over the limit, this will
prevent internal damage.
2) Tilt limit:
Tilt is limited to 15° min ~ 90° max. with reference to the ceiling when the
inclination of camera module is 0°, that is, the image is aligned horizontally.
3) Inclination limit (Horizontal image alignment):
Inclination limited to +/-60° max.
• Extreme care should be taken NOT to scratch the bubble dome surface while
installing or adjusting the camera.
• Care should be taken that the cable is NOT damaged, kinked or exposed in
a hazardous area.
• Tighten the dome cover mounting screws so that there is NO gap between Lens
hood and clear bubble to avoid IR reflection