User Manual

9
I. INSTALLATION AND CONFIGURATION
2.1 Installation
1) Dome Cover
•
Vandal Proof Domes - Use the provided Torx wrench to unscrew the vandal proof screws and remove the
dome cover.
•
Indoor Domes - Turn the dome cover to the left to remove the dome cover.
2) Flush Mount Installation:
•
Using four St4x30 screws, attach the flush mount base to a sturdy surface.
•
Optional flush mount decorator plate. Model: VT-MD-FMP
3) Surface Mount Installation:
•
Drill pilot holes at the mounting location using the provided mounting template. Using four St4x30 screws,
mount the surface mount housing to a sturdy surface. Using four ST4x12 (Indoor) screws or M4x10 (Vandal-
proof) screws, attach the flush mount base to the surface mount housing.