Manual

ManualsBrandsVitek ManualsDome Security Cameras8 Megapixel 4K Indoor/Outdoor 4-in-1 HDA Fixed IR Vandal Dome Camera, 2.8mm Lens

VITEK

VTC-THB8R2

VTC-THT8R2

Transcendent 8.0 Megapixel Indoor/

Outdoor 4-IN-1 HDA Cameras

FEATURES

• 1/2.5” 8 MegaPixel [4K] Progressive Scan CMOS image

sensor

• High Definition Analog (HDA) / HD-TVI / AHD / HD-CVI /

CVBS

• 8MP@15fps, 5MP@20fps, 4MP@30fps High Res, True Color

• Supports OSD Menu

• 2.8mm Fixed Iris Lens

• 1 Matrix IR with up to 100’ IR Range (VTC-THB8R2, VTC-

THT8R2), 16 SMD IRs with up to 100’ Range (VTD-THD8R2)

• True Mechanical Day/Night function by ICR

• XD-DNR Noise Reduction

• IP67 Weather Resistance

• Supports Up The COAX Control (CoC)

• Over 1500’ HD Video Transmission (Depending on cable

characteristics and integrity)

• VTC-THB8R2: J Boxes - VT-TJB07, TJB08

VTC-THT8R2: J Boxes - VT-TJB01, TJB08, Wall Mount VT-TWMT-3

VTD-THD8R2: J Box - VT-TJB03A, Wall Mount VT-TWMT-3,

In-ceiling Semi Flush Mount VT-TFMT-S

• 12VDC Operation

• 3-year Warranty

VTD-THD8R2

Summary of content (12 pages)

PAGE 1
VITEK VTC-THB8R2 VTC-THT8R2 VTD-THD8R2 Transcendent 8.0 Megapixel Indoor/ Outdoor 4-IN-1 HDA Cameras FEATURES • 1/2.5” 8 MegaPixel [4K] Progressive Scan CMOS image sensor • High Definition Analog (HDA) / HD-TVI / AHD / HD-CVI / CVBS • 8MP@15fps, 5MP@20fps, 4MP@30fps High Res, True Color • Supports OSD Menu • 2.
PAGE 2
Safety Precaution To prevent electrical shock and risk of fire hazards, do not expose this unit to rain or moisture and only use specified power source.. CAUTION: TO REDUCE THE RISK OF ELECTICAL SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.
PAGE 3
Video Connection Connect the BNC video connector to a BNC cable, then to a DVR. VTC-THB8R2 Components Camera Screws User Manual Drill Template Overview Monitor 2 Video 1 Video Output Mode Switch: 34 5 6 7 1 Lens 6 Output Mode Switch 2 Sun Shield 7 Power Cable 3 Mount Lock 4 Mount Base 5 BNC Video Output This series supports AHD/TVI/CVI/CVBS video output.
PAGE 4
Installation Before you begin, please make sure that the wall or ceiling is strong enough to withstand 3 times the weight of the camera. The mounting steps are as follows: 2. Route the cables and connect the power & video cables, use the rubber plug to fill the gap of the mounting base. then secure the mounting base to the ceiling or wall with screws. 1.
PAGE 5
VTC-THT8R2 Components Camera Hex Wrench Manual Mounting Plate Screws Rubber Plug Video Connection Connect the BNC video connector to a BNC cable, then to a DVR. Monitor Overview Video 3 Video Output Mode Switch: 4 5 2 This series supports AHD/TVI/CVI/CVBS video output. The video output can be changed by pressing and holding the button in the video switch cable for 5 seconds (the default video output is TVI video output).
PAGE 6
Installation 4. Tighten the lock screws to secure the viewing angle adjustments. Before you begin, please make sure that the wall or ceiling is strong enough to withstand 3 times the weight of the camera. The mounting steps are as follows: 1. Attach the drill template to the place where you want to install the camera, then drill 3 screw holes and 1 cable hole (if you want to route the cables through the mounting base) according to the drill template . 2.
PAGE 7
Video Connection VTD-THD8R2 Components Connect the BNC video connector to a BNC cable, then to a DVR. Monitor Camera Screws Manual Hex Wrench Drill Template Video Overview Video Output Mode Switch: 3 4 This series supports AHD/TVI/CVI/CVBS video output. The video output can be changed by holding and pressing the button in the video switch cable for 5 seconds (the default video output is AHD video output). Before switching video outputs, please remove the cover of the video switch cable.
PAGE 8
Installation Before beginning installation, make sure that the wall or ceiling is strong enough to withstand 3 times the weight of the camera. The mounting steps are as follows: 4. Adjust the Three-axis camer bracket to obtain the optimium viewing angle. 1. Attach the drill template to the place where you want to install the camera, then drill the screw holes and 1 cable hole according to the drill template. Pan: 0°~240° 2.
PAGE 9
Camera OSD Menu The Transcendent 4-in1 camera series must be connected to a DVR which supports HD-TVI/AHD video signal input and COC protocol to access the OSD setup menu. Different DVRs manufacturers may have different modes of menu operation. The Following image will pop-up when you left click once on the image when using Transcendent HDA DVR's. You will see the following interface by clicking the PTZ button. You can select the menu by clicking (U) or (D) key on the direction area.
PAGE 10
Detailed Specifications Image Sensor Signal System Effective Pixels Resolution Video Output Frame Rate Lens Day/Night Min. IIIumination IR LEDs IR Distance S/N Ratio Smart IR TV Lines Digital Noise Reduction (DNR) White Balance BLC Up the COAX Control (COC) Transmission Distance Power Input Power Consumption (12VDC) Resistance Rating Operation Conditions Weight Dimensions VTC-THB8R2 VTC-THT8R2 1/2.5” 8.0 Megapixel Progressive Scan CMOS Sensor PAL/NTSC 3840 x 2160 HD-TVI & AHD: 8.0 MegaPixel / CVI: 4.
PAGE 11
OPTIONAL MOUNTS FOR FIXED TRANSCENDENT CAMERAS VT-TJB01 VT-TJB08 VT-TWMT3 VT-TJB07 VT-TJB03A VT-TFM-S Optional Junction Box for Cable Management for use with Select Transcendent Bullet and Turret Style Cameras including VTC-THT8R2. Optional Junction Box for Cable Management for use with Select Bullet Style Cameras including VTC-THB8R2. Optional Junction Box for Cable Management for use with Select Transcendent Cameras including VTC-THT8R2, VTC-THB8R2.
PAGE 12
Limited Product Warranty VITEK products carry a three (3) year limited warranty. VITEK warrants to the purchaser that products manufactured by VITEK are free of any rightful claim of infringement or the like, and when used in the manner intended, will be free of defects in materials and workmanship for a period of three (3) years, or as otherwise stated above, from the date of purchase by the end user.