VTM-TLM28P-4K Transcendent 28” 4K HDMI(3x) LED CCTV Monitor with 3D Comb Filter and De-interlacing FEATURES: • 28” Display with 16:9 Aspect Ratio • 4K Resolution (3840x2160) • 3 x HDMI Inputs • 1 x DP Input + Audio Output • 3D Noise Reduction • Super Slim Design • Built-in 3D Comb Filter, Supports De-interlacing • Contrast Ratio of 1000:1 • 5ms Response Time • 1.
Table of contents Safety Symbols & Precautions------------------------------------------ 2~5 Accessories----------------------------------------------------------------------6 Installation-----------------------------------------------------------------------6 Controls & Functions--------------------------------------------------------- 7 OSD setup under HDMI & DP input mode--------------------------8~20 Care and Cleaning----------------------------------------------------------- 21 Mounting Your MON
WARNING Failure to abide by the information in a WARNING may result in serious injury and can be life threatening. CAUTION Failure to abide by the information in a CAUTION may result in moderate injury and/or property or product damage. Alert electrical hazard. Indicates a prohibited action. Indicates to ground for safety. Safety Symbols & Precautions Safety Symbols This manual uses below safety symbols. They denote critical information. Please read them carefully.
WARNING If the unit begins to emit smoke, smells like something is burning, or makes strange noises, disconnect all power connections immediately and contact your dealer for advice. Attempting to use a malfunctioning unit may result in fire, electric shock, or equipment damage. Do not open the cabinet or modify the unit. To Tu Th No Opening the cabinet or modifying the unit may result in fire, electric shock, or burn. Us Refer all servicing to qualified service personnel.
, To disconnect the power cord, grasp the plug firmly and pull. Tugging on the cord may damage and result in fire or electric shock. The equipment must be connected to a grounded main outlet. Not doing so may result in fire or electric shock. Use the correct voltage. - The unit is designed for use with a specific voltage only. Connection to another voltage than specified in this User’s Manual may cause fire, electric shock, or equipment damage.
Do not block the ventilation slots on the cabinet. Do not place any objects on the ventilation slots. Do not install the unit in a closed space. Do not use the unit laid down or upside down. Blocking the ventilation slots prevents proper airflow and may result in fire, electric shock, or equipment damage. ins Do not touch the plug with wet hands. Doing so may result in electric shock. Periodically clean the area around the plug. AC 12 Dust, water, or oil on the plug may result in fire.
Accessories Please check the following listed accessories before installation: AC cable X 1, HDMI cable X 1, User Manual X 1, LCD Monitor X 1, 12VDC Power Supply X 1, LCD Monitor X 1, Desktop Stand X 1, Installation 1. Rear Interface Explanation of connectors DC: power supply 12V 4A HDMI (1/2/3): Lets you connect a device, such as a digital cable box, with an HDMI or a DVI output.
video and audio data by way of an integrated mini-plug cable. Since HDMI technology is based on Digital Visual Interface (DVI), the jack on the back of your MONITOR is also compatible with DVI devices. HDMI Input lets you connect a device, such as a digital cable box, with an HDMI output. 1 2 3 HDMI1[2.0 & downwards]；HDMI2&3[1.4 & downwards] 4 DP: Connect a video output device with DP. Computer / Notebook. 5 AUDIO OUT: Connect external 3.
DMI ck 1. Turn on / off the monitor 2.SOURCE: Accesses the available video input signals (DP), HDMI1[2.0], HDMI2[1.4], HDMI3[1.4] 3.MENU： Bring up the MONITOR main menu. 4.＋: Turn on the brightness. In the MONITOR menu system, adjusts menu controls. 5.－ : Turn on the picture mode. In the MONITOR menu system, adjusts menu controls. 6. Indicator: In red when standby mode, in green when display. HOW to use buttons Use the buttons on the right side control panel to adjust the OSD 1.
Remote control（OPTIONAL） POWER MENU POWER Remote control（OPTIONAL） Turn on & off the monitor RIGHT O Display or exit the main menu Turn on & off the monitor VIDEO Source switching / Cursor up when OSD appears MENU Display or exit the main menu MODE/DWON MODE no effect / Cursor down when OSD appears VIDEO Source switching / Cursor up VIDEO/UP Enter the sub-menu to reduce the LEFT when OSD appears value MODE no effect / Cursor down when MODE/DWON Enter the sub-menu to increase the RIGHT OSD value appea
OSD setup OSD setup under HDMI & DP input mode Menu Remark Input Source: The monitor will automatically Display the channel that with signal feed in.
Menu Brightness/Contrast: Remark Brightness：Set the image brightness (0-100) Contrast：Set the image Contrast (0-100) DCR： Set the dynamic contrast ratio (on / off) 11
Menu Color Set: Gamma: Set the image gamma Remark (1.8, 2.0, 2.2, 2.4, 2.
Hue: Set the image hue (0-100) Saturation: Set the image saturation (0-100) Low Blue Light: Set the low blue light (0-100) Menu 13 6
Remark Picture Quality Set: Sharpness: Set the picture sharpness (0-100) Response Time: Set the picture response time (off, high, middle, low) Noise Reduction: Set the picture noise reduction (off, high, middle, low) Super Resolution: Set the picture super resolution (off, high, middle, low) Dynamic Luminous Control: Set the picture dynamic luminousity (on / off) 14
Menu Remark Display: Aspect Ratio: Screen aspect ratio Set (wide screen, 4:3, 1:1, auto) 15
Menu Audio: Remark Mute: Mute the audio output to the earphone (on / off) Volume: Set the audio output volume to the earphone (0-100) 16
Menu Multi-Window: Multi-Window: Set the screen multi-window Remark (off, PIP mode, PBP 2win, PBP 3Win, PBP 4Win) Sub Win2 Input: Set the sub win2 input (HDMI2[1.4]) Sub Win3 Input: Set the sub win3 input (HDMI3[1.
Sub Win4 Input: Set the sub win4 DP PIP Size: Set the PIP picture size (small, medium, large) PIP Position: Set the PIP sub window position (top right, top left, bottom right, bottom left) Swap: Switch the main window with the sub window Menu 18
Remark OSD: Language: OSD language selection (English, Chinese, Korean, Russian, Spanish, Japanese, French) OSD H-Position: Change OSD horizontal position adjustment (0-100) OSD V-Position: Change OSD vertical position adjustment (0-100) OSD Transparency: OSD transparency adjustment (0-100) OSD Time Out: OSD display dwell time selection (0-100 seconds) OSD Rotation: OSD rotation adjustment (Normal, 90, 180, 270) 19
Menu Other: Reset: Reset the monitor to default factory setting.
Care and Cleaning CAUTION: Turn off your MONITOR before cleaning. You can clean the MONITOR as required, using a soft lint-free cloth. Be sure to occasionally dust the ventilation slots in the cabinet to help assure adequate ventilation. The Monitor’s screen may be cleaned with a soft, lint-free cloth as well. Take care not to scratch or mar the screen. If necessary, you may use a cloth dampened with warm water.
VTM-TLM28P-4K Specifications Panel Type 28’’ 16:9 LED Backlit Monitor Resolution 3840 x 2160 Pixel Pitch 0.16 x 0.16mm Contrast Ratio Display Features Brightness Response Time Colors Viewing Angle (H/V) 1000:1 PIP 300 cd/m² 5ms 1.073G 170º/170º Inputs 3 x HDMI + DP Audio 1 x Audio (2.
LIMITED PRODUCT WARRANTY VITEK products carry a three (3) year limited warranty. VITEK warrants to the purchaser that products manufactured by VITEK are free of any rightful claim of infringement or the like, and when used in the manner intended, will be free of defects in materials and workmanship for a period of three (3) years, or as otherwise stated above, from the date of purchase by the end user.
