User manual

Processing VITEK
®
2 Test Cards Batch Loads (Smart Carrier or Cassette Only Mode)
VITEK
®
2 Instrument User Manual 6-29
510731-10EN1
2) Access the Batch Load function on the Main Menu.
The VITEK
®
2 instrument checks to ensure that at least three boats are
available, and that there are no test cards currently in the card transport
system. It then displays the following screen:
Figure 6-15: Batch Load Screen
Note: This screen does not appear if there are only three boats in the instrument. In
that case, a batch load of three cassettes is assumed.
If less than three boats are available, or if the card transport system is
unavailable, the following message appears:
The card transport system is not available for batch
load. Load a single boat or try again later.
3) Press the option button that corresponds to the number of cassettes that
you want to load.
• The following screen displays for Smart Carrier Mode:
Figure 6-16: Smart Carrier Mode Batch Load Screen
• The following screen displays for Cassette Only Mode: