User manual

7-20 VITEK

2 Instrument User Manual

510731-10EN1

Cleaning the Cassettes Maintaining the VITEK

2 Instrument

Figure 7-18: Removing the Button Memory Module

4) Clean the metal contacts (3, Figure 7-19) on the module with an alcohol

wipe.

Figure 7-19: Metal Contacts on Cassette

Note: When cleaning multiple cassettes, it is not necessary to match a button

memory module to a particular cassette. The units are completely

interchangeable.

5) The cassettes should be thoroughly cleaned and dried before they are

used again.

Replacing the Button Memory Module

1) Turn the cassette over and hold it in your right hand.

2) Hold the memory module by the extended tab (1, Figure 7-20) in your

right hand so that the two metal contacts (2) will line up with the two

holes in the side of the cassette (3).