User manual

2-6 VITEK
®
2 Instrument User Manual
510731-10EN1
Smart Carrier Station Overview Smart Carrier Station
Figure 2-3: Initial SCS Screen
5) When the SCS is ready to be used, the screen shown in Figure 2-3 will
be displayed. If there is no display, switch the power OFF and restart at
Step 2.
Note: If you have not yet customized your configuration settings, the Configuration
screen is displayed. For information on changing the settings, see Chapter 3
in this Manual.
Smart Carrier Station Overview
The Smart Carrier Station (SCS) is a small computer dedicated to collecting
information about test cards and specimens, and for transferring that
information to the VITEK
®
2 instrument. The SCS, shown in Figure 2-4, has
five main components.