User manual

2-10 VITEK
®
2 Instrument User Manual
510731-10EN1
Setup Bar Codes Smart Carrier Station
Setup Bar Codes
The bar code scanner is programmed at the factory. Use these setup bar
codes in the event that the Bar Code Scanner loses its settings.
1) Press F4 to access the Configuration screen.
2) Press Next or Previous Screen until the Firmware Update screen
displays.
Figure 2-6: SCS Firmware Update Screen
Shipment and
Storage
Temperature:
–20 ºC to +50 ºC
Humidity: 20% to 80% (Non-Condensing)
Minimum
installation
altitude:
–100m
Maximum
installation
altitude:
2000m
WARNING
Do not operate the SCS in an environment above 30 °C (86 °F)
Table 2-3: Environmental Requirements (Continued)
1