User manual

3-4 VITEK
®
2 Instrument User Manual
510731-10EN1
SCS Main Configuration Options SCS Configuration
Setting Cassette ID
1) Press F4 to access the Configuration screen.
2) In the Cassette ID field, type up to three characters and press Enter.
3) Press F2 to exit the SCS Configuration screen.
or
Press Next or Previous Screen to access other configuration screens.
Setup Technologist ID
The Setup Technologist ID field allows you to enter your name at the SCS
and transfers that information to the workstation. This field will be displayed
and available only if the Host Type field is set to “PC”.
Setting Setup Technologist ID
1) Press F4 to access the Configuration screen.
2) Press the Down Arrow key to move the cursor to the Setup
Technologist ID field.
3) In the Setup Technologist ID field, type up to thirty-five characters and
press Enter.
4) Press F2 to exit the SCS Configuration screen.
or
Press Next or Previous Screen to access other configuration screens.
Bench Name
The Bench Name field allows you to enter an alphanumeric name that tags a
bench (or Sample Area) where a given cassette was set up. This field will be
displayed and available only if the Host Type field is set to “PC”.
Setting Bench Name
1) Press F4 to access the Configuration screen.
2) Press the Down Arrow key to move the cursor to the Bench Name field.
3) In the Bench Name field, type up to thirty characters and press Enter.
4) Press F2 to exit the SCS Configuration screen.
or
Press Next or Previous Screen to access other configuration screens.