User manual

3-6 VITEK
®
2 Instrument User Manual
510731-10EN1
SCS Workflow Configuration Options SCS Configuration
Erase Cassette
The Cassette Erase function gives you the option of automatically erasing
cassettes that have been processed by the VITEK
®
2 instrument.
Setting Cassette Erase
1) Press F4 to access the Configuration screen.
2) Press Next or Previous Screen to access the Workflow Configuration
screen.
There are two settings available, Automatic (default) and Verify First.
•Select Automatic to automatically erase cassettes that have been
processed.
•Select Verify First to display and review data before it is erased.
3) Press 1 or 2 to select Automatic or Verify First as indicated on the
screen.
Note: If you select Verify First, when you place a cassette that has been processed
by the instrument on the Smart Carrier Station, the following message
displays:
Cassette has been processed
4) Press F1 to erase, or press any other key to display processed
information.
5) Press F2 to exit the screen.
Begin Data Entry
The Begin Data Entry function allows you to customize the workflow
associated with the Cassette Edit screen.
Setting Begin Data Entry
1) Press F4 to access the Configuration screen.
2) Press Next or Previous Screen to access the Workflow Configuration
screen.
The possible settings are Cassette ID and Accession/Lab ID. (Accession
ID is the same as Lab ID.)
•Select Cassette ID to begin data entry in the Cassette ID field of the
Cassette Edit screen (default).
•Select Accession ID to begin data entry in the Accession ID field of
the Cassette Edit screen.
3) Press 1 or 2 to select your preferred workflow as indicated on the screen.