User manual

Configuring the VITEK
®
2 Instrument Using the Interface
VITEK
®
2 Instrument User Manual 5-11
510731-10EN1
The following screen appears:
Figure 5-5: Schedule QC Status Screen
The time fields operate on a 24-hour clock. Times A, B, or C are disabled
until you schedule the QC Status.
Note: The Left or Right Arrow keys beneath Hours/Minutes allow you to toggle
between Hours and Minutes when setting the time.
To set the Hour for Time A:
1) Press the Left Arrow key until Hours displays.
2) Use the Up or Down Arrow keys to set the hour.
To set the Minutes for Time A:
1) Press the Left Arrow key until Minutes displays.
2) Use the Up or Down Arrow keys to set the minutes.
3) To schedule another QC Status report, select Time B by pressing the
Next button.
4) To exit the function press Enter.
Using Option Boxes
This procedure applies to the following configuration options:
• Cassette Mode
• Dilution Mode
• Bar Code Reader
• Audible Alarm Enable
• Visual Alarm Enable
1) Access one of the above configuration options using the following path:
Main Menu > Utilities > Configuration