User manual

5-12 VITEK
®
2 Instrument User Manual
510731-10EN1
Using the Interface Configuring the VITEK
®
2 Instrument
2) Press Up or Down Arrow to choose an option.
A screen similar to Figure 5-6 appears.
Figure 5-6: Option Box Screen
3) To change the current setting, press the Up or Down Arrow keys.
Setting a Range Value
This procedure applies to the following configuration options:
• Audible Alarm Volume
• Audible Feedback Volume
• Screen Contrast
• Waste Tray Warning Level
1) Access one of the above configuration options using the following path:
Main Menu > Utilities > Configuration
2) Press Up or Down Arrow to choose an option in the range (see
Figure 5-7).
Figure 5-7: Range Value Screen
3) Change the range value by pressing the Left or Right Arrow keys.
The bar graph and the numeric value change, and the actual parameter
changes in response to this action.
Note: Do NOT set the screen contrast to either end of its available range. Doing so
may make the screen unusable.
Note: For the Audible Alarm Volume parameter, a test button sounds the alarm.