Manual

POWER MIXER

S TA N D

QEP Co UK Ltd.

Everest Road

Lytham St Annes

Lancashire

FY8 3AZ

Tel: +44 (0) 1253 789180

Fax: +44 (0) 1253 789182

www.vitrex.co.uk

WARNING

Some dust created by power sanding, sawing, grinding, drilling, and other

construction activates contains chemicals known to the State of California to

cause cancer, birth defects or other reproductive harm. Some examples of these

chemicals are:

• Lead from Lead-based paints,

• Crystalline silica from bricks and cement and other masonry products, and

• Arsenic and chromium from chemically treated lumber.

Your risk from these exposures varies, depending on how often you do this type

of work. To reduce your exposure to these chemicals: work in a well ventilated

area, and work with approved safety equipment, such as those dust masks that

are specially designed to lter out microscopic particles.

WARNING

Read carefully and understand all

INSTRUCTIONS before operating.

Failure to follow the safety rules

and other basic safety precautions

may result in serious personal

injury.

Stand Suitable for uSe with Vitrex MixerS

MIXSTAND

PAGE 1
POWER MIXER WARNING Some dust created by power sanding, sawing, grinding, drilling, and other construction activates contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • Lead from Lead-based paints, • Crystalline silica from bricks and cement and other masonry products, and • Arsenic and chromium from chemically treated lumber.
PAGE 2
POWER MIXER STAND SPECIFICATIONS ASSEMBLY INSTRUCTIONS Unpack the Mixer Stand and ensure none of the components have been damaged during transit. Components are listed in the table below: assembling the wheels Note: Place the wheels on the axles and insert the wheel rotating pins. Bend one leg of the pins to secure See Figure 1, Figure 2 & Figure 3 Item# Description Qty 1 Mixer stand 1 2 Rubber feet 3 3 Screws 3 4 Wheels 2 5 Wheel Pins 2 FIG.1 FIG.2 FIG.