ENG INSTRUCTION MANUAL DC-AC FRIDGES THANK YOU FOR PURCHASING A VITRIFRIGO PRODUCT
Index 1. INTRODUCTION 16 2. GENERAL WARNINGS 18 Destination of the product 18 Receipt Installation 19 19 Maintenance and safety (all models) Disposal 20 21 3. PURPOSE OF THE MANUAL Identification of the manufacturer 21 21 4. DESCRIPTION OF THE APPLIANCE 21 5.
Dear client, thank you for choosing one of our products. Vitrifrigo hopes that you will be completely satisfied with your purchase. This manual is considered an integral part of the refrigerator and must follow the sales path to the user. The same can be consulted on the Vitrifrigo website www.vitrifrigo.com. Each refrigerator, before being shipped, is thoroughly checked and tested to ensure it operates correctly.
• This appliance is designed for use in applications such as: o kitchen areas for personnel in shops, offices and other work environments. o By customers of farms, hotels, motels and in other residential environments. o Bed and Breakfast establishments. o In catering services and similar applications but not for retail purposes. o In camper vans, caravans and on pleasure craft. • Whenever this refrigerator should replace an old type, it is recommended to make any lock unusable before scraping it.
label on the compressor. • Once installation has been completed, check that the refrigerator is not resting on a power cable. • If the power supply cable is damaged it must immediately be replaced by the technical assistance service or by qualified personnel.
(electric heating appliances or similar).. Disposal • Do not throw the packaging used for your appliance away. Separate the materials according to local waste disposal regulations. • This product must not be disposed of with municipal waste but must be disposed of separately. • Contact your nearest Waste Electrical and Electronic Equipment (WEEE) collection centre or take it to a retailer when purchasing a new, equivalent appliance.
4. DESCRIPTION OF THE APPLIANCE (fig.1) A1 B G A B D E C G A) horizontal evaporator C) thermostat box F) fruit drawer (*) A1) vertical evaporator D) removable grilles G) door shelves (removable) B) drip tray E) glass shelf (*) (*) only in some models The label showing the serial number and the technical data is placed inside the refrigerator. The first four digits of the serial number identify the year and the week of manufacture. 5.
eventual contents. Once installation has been completed, check that the refrigerator is not resting on a power cable. If the power cable is damaged, it must be replaced immediately by someone from the technical service centre or by someone suitably qualified, in order to avoid any risk. Place the refrigerator away from heat sources ensuring that it has enough ventilation as in the following installation examples. Once the refrigerator has been positioned, wait at least one hour before switching it on.
The recess must respect the minimum distances between the appliance and the surrounding structure and it must have suitable ventilation openings communicating directly with the open space in the room, in order to obtain correct air circulation by means of the chimney effect, as indicated in annex 2 - figure 2 The recess must ensure that all possible live parts of the appliance are not directly accessible as well as the ventilation openings, by fitting them with suitable grilles.
Appliance recess for campers, caravans and motor-homes. To install the refrigerator or fridge units in a caravan, camper van, motor home etc. make the recess space in the vehicle with ventilation vents directly on the outside, fitted with suitable grilles to ensure that all possible live parts of the appliance are not directly accessible (thermostat, electronic module and fan). The grilles must have openings with max. dimension of 5mm and be on at least one side (see annex 2 fig. 1-2-3).
Prepare the alternating current power supply line using three-pole cable with minimum section per wire of 1 mm2 and suitable isolation for the methods and environment of use and compliant with the regulations in force.
Food Preservation time Method of preservation Clean meat and fish 2 or 3 days On the grille/shelf under the freezer area Eggs 1 month Use the door compartments Butter or margarine 1 week Cooked foods, cakes and soups 3 or 4 days Cold cuts, fresh pasta, creams, puddings, chocolate, pastries, animal fats 3 or 4 days Exclusively wrapped or closed in airtight containers and placed in the fridge after they have cooled down if previously heated Position in fridge Use the door compartments On the
If the refrigerator will not be used for a long time, disconnect it from the electrical power supply, empty it out completely, clean it and leave the door in the “Vent Position”(*). Defrosting the appliance It will be necessary to defrost the refrigerator every often when the frost builds up to a thickness of more than three millimetres. This operation is necessary in order to guarantee that the fridge works efficiently and to avoid increasing the electricity consumption.
that the refrigerator is not connected to any electrical supply. If connected, unplug the appliance from the electrical supply. To replace the LED light profile: 1. Remove, perpendicular to the base, the protective cover, being careful not to damage the fixing pins. 2. Disconnect the light’s power cables. 3. Replace the LED light profile. 4. Connect the power source. 5. Replace the cover. 10.
