Fridge Range Product Manual

29ENG
that the refrigerator is not connected to any electrical supply. If connected, unplug the
appliance from the electrical supply.
To replace the LED light prole:
1. Remove, perpendicular to the base, the protective cover, being careful not to
damage the xing pins.
2. Disconnect the light’s power cables.
3. Replace the LED light prole.
4. Connect the power source.
5. Replace the cover.
10. TROUBLESHOOTING GUIDE
What to do if the fridge doesn’t work
Problem Cause Solution
The refrigerator
does not start
No electrical current
Check that the power supply cable is intact
and properly connected.
DC mode: Check that the battery is charged
Check that the voltage on the terminal block of the appliance’s
electronic device is the same as that of the battery.
Try running a reset
Disconnect the power cable.
Wait for a minute and then reconnect it.
Thermostat in “STOP”
position
Move the thermostat to the recommended position
The refrigerator
does not cool
Insucient
output
Check that:
(a) the door closes hermetically;
(b) the refrigerator is not near heat sources and is suciently
ventilated;
(c) the condenser is not clogged with dust.
The refrigerator
does not stop
The internal
temperature is too
high
Check that the door is completely closed
The courtesy
light does not
switch on
The light is faulty Call the service centre
The refrigerator
is noisy
Check that the refrigerator sits at and is not in direct contact
with any object that might cause vibrations.
If you do not manage to achieve regular operation aer these checks, contact the
customer assistance service.