Installation & Assembly

PARTS LIST

Step 1

Step 2

SLAT SECTION

SUPPORT RAIL

CENTER LEG

2 SET

2 PCS

4 PCS

Allen wrench

Assemble center legs (03) and support rail (02).

Assemble bed frame according to assembly instructions.

Using Allen screw (A).

Tighten with the Allen wrench (C).

Repeat for other support rail.

Page 1 of 2

HARDWARE

1 1/2” (40mm) Allen screw - 8 pcs

Spare - 1 pc

1 1/4” Wood screw - 8 pcs

Spare - 2 pcs

Allen wrench - 1 pc

Spare - 1 pc

NOTE: WE INCLUDE SPARE HARDWARE IN CASE THE ALLEN WRENCH, ALLEN SCREW,

OR WOOD SCREWS ARE DAMAGED DURING ASSEMBLY.

ASSEMBLY INSTRUCTION

1 1/2” Allen screw

Adult assembly

PAGE 1
ASSEMBLY INSTRUCTION PARTS LIST 01 02 01 SLAT SECTION 2 SET 02 SUPPORT RAIL 2 PCS 03 CENTER LEG 4 PCS 03 03 HARDWARE A NOTE: WE INCLUDE SPARE HARDWARE IN CASE THE ALLEN WRENCH, ALLEN SCREW, OR WOOD SCREWS ARE DAMAGED DURING ASSEMBLY. 1 1/2” (40mm) Allen screw - 8 pcs Spare - 1 pc Step 1 B C 1 1/4” Wood screw - 8 pcs Spare - 2 pcs Allen wrench - 1 pc Spare - 1 pc Assemble bed frame according to assembly instructions. Step 2 Assemble center legs (03) and support rail (02).
PAGE 2
SLAT KIT FULL LOWER BUNK Step 3 A Lay the slat section (01) onto the bed. Attach support rail assembly (02) to the slat section (01). Using Allen screw (A), tighten with the Allen wrench (C). SECTION 2 Repeat for section 2. C 01 A A 02 Adult assembly SECTION 1 A TRUNDLE BED A 1 1/2” Allen screw A C Allen wrench If using a Trundle Bed attach support rail assembly off center as shown. Repeat for section 2.