Assembly Instructions
Contents: 16 -1 3/4" Bolts
16 -Cap Nuts
16 -Flat Washers
4 -1 1/4" Screws
1 -Seat Assembly
1 -Table Top Assembly
4 -Legs
2 -Braces
You will need a standard phillips and a fl at screwdriver and a pair of pliers to
complete assembly.
1. Please inspect the parts for damage during shipping and for
any missing items. If you suspect that there may be damage or a
shortage, call us to send replacement parts if needed. At this time,
visualize how the components fi t together per the drawings and
make sure that you have everything indentifed.
2. Stand seat assembly on it's side. Position legs as shown on
outside of seat assembly and install bolts through both parts. Start
washer and then a cap nut on each bolt until hand tight.
3. Place Table in an upright position and lower table top into posi-
tion as shown. Install the remaining 8 bolts through the legs and
into the table top. Now add a washer and a cap nut to each bolt
and hand tighten.
4. Using a screwdriver on the bolt head and pliers or an adjustable
or a
7/16" wrench on the cap nut, completely tighten all bolts until the
bolt head begins to be pulled slightly into the wood.
5. Turn table upside down and fi t the two braces into the four
slots. Adjust the bottoms of the braces so that all four fi t as fl at as
possible into the bottoms of the slots. Make sure that they fi t cor-
rectly. From the outside of the seat assembly, install a 1 1/4" wood
screw into each brace and tighten.
6. Turn table upright and install two 1 1/4" wood screws through
the top of the table and into the brace until tight.
If you have any problems in assembly, please call us for help.
Care and Cleaning:
Page 1 of 1
WARNING: ADULT ASSEMBLY REQUIRED
WARNING: Assembly kit contains parts with sharp edges.
WARNING: Assembly kit contains parts with sharp points.
WARNING: Package contains plastic bags that present suffocation risks for children.
WARNING: Assembly kit contains small parts that present choking hazards for children.
If this Children's Picnic Table is unfi
nished, it must be totally protected by an outdoor/exterior rated stain or house paint BEFORE
being used outside. If this product is fi nished in the natural or clear lacquer fi nish it is for inside use only. Exposure to weather or
sun will quickly damage products in the unfi nished or natural laquer fi nish.
If this Children's Picnic Table is painted, the fi nish is designed to provide long lasting protection when exposed to the harshness
of weather. But no matter how durable, painted wooden furniture should not be left outdoors continually. It is best to store it
inside when not in use. Even in mild conditions, painted wood furniture left outdoors will eventually fade and show the effects of
exposure to weather. To clean your painted furniture, use a mild detergent such as a dishwashing liquid and a soft cloth. Never
use any type of abrasive cleanser.
1
2
3
4
5
6
Made in America
We hope that you and your little ones enjoy this Picnic Table for many years. Please call us if you have any questions.
Assembly Instructions for Child's Picnic Table