Installation & Assembly

READY

LIFESTYLE BED DRAWER

Page 1 of 2

HARDWARE

A B

JCB M6 X 1 1/8”( 30mm ) - 16 pcs

Spare - 2 pcs

Allen wrench - 1 pc

Spare - 1 pc

Allen wrench

NOTE : WE INCLUDE SPARE HARDWARE IN CASE DAMAGE OCCURS DURING ASSEMBLY.

ASSEMBLY INSTRUCTIONS

Before assembling your bed drawer, please read through these

instructions carefully, familiarize yourself with the different parts.

Adult assembly

PARTS LIST

HARDWARE 1 BOX

2 PCS

4 PCS

DRAWER FACE

DRAWER SIDE

2 PCS

DRAWER BACK

DRAWER BOTTOM

Step 1

Lay the drawer face (02) on smooth, flat surface so the groove is facing upwards. Fit the drawer

side (03) to drawer face (02), Use JCB M6 X 1” (A), align groove inside panel with groove in

drawer face. Tighten with Allen wrench (B).

JCB M6 X 1 1/8”

Allen wrench

PAGE 1
LIFESTYLE BED DRAWER ASSEMBLY INSTRUCTIONS READY Before assembling your bed drawer, please read through these instructions carefully, familiarize yourself with the different parts. Adult assembly Allen wrench NOTE : WE INCLUDE SPARE HARDWARE IN CASE DAMAGE OCCURS DURING ASSEMBLY.
PAGE 2
LIFESTYLE BED DRAWER Step 2 Guide the drawer bottom (05) in carefully so Step that it won’t jump out of its grooves. Be sure it fits fully into its groove at the bottom (in the drawer face) before fitting the drawer back. A 3 Attach drawer back (04) to bed drawer assembly as shown. Use JCB M6 X 1”(A). Tighten with Allen wrench (B). 05 04 Adult assembly A A JCB M6 X 1 1/8” B Allen wrench Adult assembly Congratulations! Your lifestyle bed drawers are now ready for use.