Installation & Assembly

BED WITH BED DRAWER

Page 1 of 3

BED DRAWER

HARDWARE

JCB M6 X 2 1/2 ”( 60mm ) - 8 pcs

Spare - 2 pcs

Barrel Nut - 8 pcs

Spare - 2 pcs

JCB M6 X 5/8”( 15mm ) - 8 pcs

Spare - 2 pcs

Allen Wrench - 1 pc

Spare - 1 pc

Adult Assembly

Allen Wrench

READY

NOTE: WE INCLUDE SPARE HARDWARE IN CASE THE ALLEN WRENCH, JCB OR BARREL NUT ARE DAMAGED DURING ASSEMBLY.

PANEL BED DRAWER

ASSEMBLY INSTRUCTIONS

Thank you for choosing our panel bed drawer.

This practical design offers the utmost in versatility.

Before assembling your Drawer bed, please read through these

instructions carefully. Familiarizing yourself with the different parts.

PAGE 1
READY PANEL BED DRAWER ASSEMBLY INSTRUCTIONS Thank you for choosing our panel bed drawer. This practical design offers the utmost in versatility. Before assembling your Drawer bed, please read through these instructions carefully. Familiarizing yourself with the different parts. Adult Assembly BED WITH BED DRAWER Allen Wrench HARDWARE NOTE: WE INCLUDE SPARE HARDWARE IN CASE THE ALLEN WRENCH, JCB OR BARREL NUT ARE DAMAGED DURING ASSEMBLY.
PAGE 2
PARTS LIST 01 HARDWARE 1 BOX 04 RIGHT DRAWER SIDE 2 PCS 02 DRAWER FACE 2 PCS 05 DRAWER BACK 2 PCS 03 LEFT DRAWER SIDE 2 PCS 06 DRAWER PANEL 2 PCS 05 03 06 04 02 STEP 1 01 C JCB M6 X 5/8” Adult Assembly 04 03 C C 03 02 02 Lay the drawer face (02) on smoth, flat surface so the holes and groove are facing upwards. Fit the drawer side (03)(04) to drawer face (02), fitting the dowels in the holes.
PAGE 3
STEP 2 STEP 3 06 05 Guide the drawer panel (06) in carefully so that it won’t jump out of its grooves. Be sure it fits fully into its groove at the bottom (in the drawer face) before fitting the drawer back. You will need to spread the drawer side apart a bit to fit the dowels in the drawer back into their holes. Do this gently, please! Remember the JCB in step1 must be a bit loose. After this, tighten all the JCB on the drawer face.