1. Insert 2 barrel nuts (#B) into the holes along each end of the side rails (#5, 6). Make sure the nut opening faces the holes. 2. Align the side rails (#5,6) to the holes along the lower end guardrails (#1, 2). Insert 2 bolts (#A) into each end. Secure into the nuts (#B) using the Allen wrench (#I). 1. Insert the barrel nuts (#B) into the holes along each rails (#7,8,9). Make sure the nut opening faces the holes. In the guardrails (#9) also insert 2 dowels (#G) into each end. 2.
3. Align the guardrail supports (#11) to the holes along the guardrails. Insert 3 bolts (#E) into each and secure using the Allen wrench (#I). 1. Insert the barrel nuts (#B) into the holes along the guardrail ends (#10). Make sure the nut opening faces the holes. Also insert 2 dowels (#G) into each end. 2. Align/insert the guardrails (#10) to the holes along the upper end guardrail (#3). Insert bolts (#A) into each end. Secure into the nuts (#B) using the Allen wrench (#I).
Insert the ladder rungs (#12) into the slots along the left and right ladder rails (#13,14). Insert a bolt (#C) into each end. Secure using the Allen wrench (#J). 1. Insert wood dowels (#G) into the holes along the top of the ladder rail, insert the other ends into the guardrails. 2. Insert a bolt (#D) into each hole from within the beds. Secure using the Allen wrench (#J).
Place a twin slat kit (#15) onto the top bed and lower bed. Insert a screw (#H) into each end. Secure using a screwdriver.