WRONG 1) Attach the top holes of the upper panel (#5) and bottom panel (#4) to the holes of the left and right back post (#2,3). 2) Prepare 4 bolts assembly by inserting flat washer (#G) onto bolts (#A).Align the bottom holes of the upper panel (#5) and bottom panel (#4) to the holes of the left and right back post (#2,3) Secure with bolts (#A).
1) Prepare 11 bolts assembly by inserting flat washer (#11) onto bolts (#A). Align back panel (#7) and front panel (#8) to the holes of the right and left side HB. Secure with bolts (#A). Right Side HB Left Side HB 2) Align bottom back and front rails (#9,10) to the bottom holes of the left and right side HB. Secure with bolts (#A). Prepare 24 bolts assembly by inserting flat washer (#G) onto bolts (#A). Align bed base frame (#6) to the holes of the side rails.
1) Align ladder A (#11) to the holes in-between the bunk beds. Secure the top ladder (#11) hole with Bolts (#A) that contains lock washer (#G). 2) Secure ladder holes (#11) on the side of the left HB with bolts (#B) that contains washer (#G). 3) Secure ladder holes (#11) on the bottom of side rails with bolts (#E) that contains washer (#G). 1) Align upper panel (#5) to the top holes of the posts (#12,13). Attach the upper panel (#5) top holes to the top holes of the posts (#12,13).
HB Prepare 6 bolts assembly by inserting flat washer (#G) onto bolts (#D). Align desk right and left frame (#17,18) to the holes of the HB as shown in the picture. Secure with bolts (#D). Prepare 4 bolts assembly by inserting flat washer (#G) onto bolts (#A). Align rails (#19) to the holes in-between the desk frames (#17,18). Secure with bolts (#A).
Prepare 6 bolts assembly by inserting flat washer (#G) onto bolts (#C). Align top board (#21) to the holes of the desk. Secure with bolts (#C). 2) Secure top holes of the side rails (#15,14) onto bunk bed with bolts (#D) that conrains washer (#G). 1) Hook the bottom of holes of side rails (#15,14) onto the bunk bed. Secure with bolts (#D) that contains washer (#G). 3) Secure rails to desk with bolts (#A) that contains washer (#G).
Prepare 4 bolts assembly by inserting flat washer (#G) onto bolts (#D). Secure bottom holes, where the side rails are resting on the desk, with bolts (#D). Prepare 12 bolts assembly by inserting flat washer (#G) onto bolts (#A). Place bed base frame (#6) onto the bunk bed on top of desk. Secure with bolts (#A).
Prepare 2 bolts assembly by inserting flat washer (#H) onto bolts (#F). Place ladder (#20) resting on the side rail of bunk bed with desk. Secure with bolts (#F).