Assembly Instructions

Adult Assembly
Phillips head
Customer Supplied
screwdriver
Adult Assembly
Phillips head
Customer Supplied
screwdriver
Page 5 of 9
Lay the twin slat kit (15) onto the bed. Fix in place using wood screws provided in the slat kit box.
FOR SLAT KIT ASSEMBLY follow assembly instructions included with slat kit.
STEP
3
15
12
STEP
4
GUARDRAIL CAN BE SET UP AT EITHER
END OF THE BUNK BED
G
G
G
G
G
I
G
13
If the bunk bed will be placed next
to a wall, the guard rail that runs
the full length of the bed should be
placed against the wall to prevent
entrapment between the bed and the wall.
Screw hole on end cap
go on inside of guard rail.
FULL GUARD RAIL
INSIDE VIEW
3/4 GUARD RAIL
ASSEMBLY
I
G
Allen Screw 2 3/4”
M
Allen wrench
Install the full and 3/4 guard rail assembly (12)(13) to the upper panel, and fix in place using Allen screws(G).
Tighten with the Allen wrench (M). Using wood screw (I) as shown below. Tighten with Phillips head
screwdriver (Customer Supplied).