Installation & Assembly Full

ASSEMBLY INSTRUCTION

FULL

Before assembling your bed slat kit, please read through these

instructions carefully and familiarize yourself with the different parts.

PARTS LIST

Step 1

Step 2

SLAT SECTION

SUPPORT RAIL

CENTER LEG

2 SET

2 PCS

4 PCS

Please note that you will require a Phillips screwdriver and an Allen wrench.

Allen wrench

Assemble center legs (03) and support rail (02).

Assemble bed frame according to assembly instructions.

Using Allen screw (A).

Tighten with the Allen wrench (C).

Repeat for other support rail.

Page 1 of 2

HARDWARE

1 1/2” (40mm) Allen screw - 8 pcs

Spare - 1 pc

1 1/4” Wood screw - 8 pcs

Spare - 2 pcs

Allen wrench - 1 pc

Spare - 1 pc

NOTE: WE INCLUDE SPARE HARDWARE IN CASE THE ALLEN WRENCH, ALLEN SCREW,

OR WOOD SCREWS ARE DAMAGED DURING ASSEMBLY.

1 1/2” Allen screw

PO :

Adult assembly

PAGE 1
ASSEMBLY INSTRUCTION FULL Before assembling your bed slat kit, please read through these instructions carefully and familiarize yourself with the different parts. Please note that you will require a Phillips screwdriver and an Allen wrench. PARTS LIST 01 02 01 SLAT SECTION 2 SET 02 SUPPORT RAIL 2 PCS 03 CENTER LEG 4 PCS 03 PO : 03 HARDWARE A NOTE: WE INCLUDE SPARE HARDWARE IN CASE THE ALLEN WRENCH, ALLEN SCREW, OR WOOD SCREWS ARE DAMAGED DURING ASSEMBLY.
PAGE 2
Step 3 A Lay the slat section (01) onto the bed. Attach support rail assembly (02) to the slat section (01). Using Allen screw (A), tighten with the Allen wrench (C). SECTION 2 Repeat for section 2. C 01 A A 02 Adult assembly SECTION 1 A TRUNDLE BED A 1 1/2” Allen screw A C Allen wrench If using a Trundle Bed attach support rail assembly off center as shown. Repeat for section 2.