Refrigerator type water cooler Model A1213364VB USER MANUAL When using electrical appliances, basic safety precautions should be followed in order to reduce the risk of fire, electric shock and injury to persons or property. This manual contains important information describing how to safely set up, use and maintain your water cooler with fridge. SAVE THIS MANUAL FOR FUTURE USE PN 5M009123X1 © 2012 ELECTROTEMP TECHNOLOGIES IN PN 5M007983X1 V0 © 2011 ELECTROTEMP TECHNOLOGIES IN C. C.
Model:A1213364VB Page 2 PRODUCT FEATURES 1 This water cooler can provide you Hot, Cold, room-temperature water and a fridge for food storage 2 Fast cooling and heating systems can provide you 80-92C hot water and 3-10C cold water with hot water capacity 4L/H and Cold water peak capacity 4L/H. The bottom fridge can chill beer, beverage, store food or make ice cubes.
Model:A1213364VB Page 3 SAFETY PRECAUTIONS To reduce risk of injury and property damage, user must read this entire manual before assembling, installing & operating dispenser. Failure to execute the instructions in this manual can cause personal injury or property damage. This product dispenses water at very high temperatures. Failure to use properly can cause personal injury.
Model:A1213364VB Page 4 SAFETY PRECAUTIONS ---Electrical Requirements Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock. A 120 volt, 60 Hz., AC only, 15 amp, fused electrical supply is required. A time-delay fuse or circuit breaker is recommended.
Model:A1213364VB TABLE OF CONTENTS Page 5 Product Features 2 Safety Precautions 3 Safety Precautions-Electrical Requirements 4 Key Information for Future Use 5 . 6 Specifications Parts & Features .. 6 Electrical diagram .. 7 8 Assembly 9 . Proper Care & Cleaning .. Operation 10 Troubleshooting 13 Limited Warranty 14 KEY INFORMATION FOR FUTURE USE Please register your dispenser immediately at www.electrotemp.
Model:A1213364VB Page 6 SPECIFICATIONS Voltage/frequency/current 120V/ 60Hz/ 5 A Refrigerant Type R-134A Cooling Power 120 W Hot Water Power 425 W Cold water capacity / Hour 1Gallon / 3.79L <10°C Hot water capacity / Hour 1Gallon / 3.79L >80°C Fridge temperature <10°C / < 50°F Fridge volume 5.94 Gallon / 22.5L Dimensions 102.8 cm H x 32 cm W x 38.2 cm D 40.5 inch H × 12.6 inch W × 15 inch D Net Weight 45Ibs / 20.
Model:A1213364VB Page 7 Electrical diagram IMPORTANT: Do NOT Return Dispenser To Store. If you have a question or problem, please contact 855-VIVA-111 for assistance.
Model:A1213364VB Page 8 ASSEMBLY Keep plastic bags away from children. 1. Remove dispenser from packaging. 2. Unpack drip tray and insert into dispenser. As shown in figure 3. Remove the bottle receptacle from packaging and insert into Stainless cold tank As shown in figure 4. Properly dispose all of packaging. 5. Find a location for your water cooler that is protected from direct sunlight and other sources of heat.
Model:A1213364VB Page 9 PROPER CARE & CLEANING! General Cleaning Perform :As needed Time Required:5minutes Note :Do Not use abrasive material or chemical cleaners 1. Unplug power cord from wall outlet. 2. Clean cabinet surfaces with a soft cloth and warm soapy water. 3. Wipe dust from back of dispenser to improve efficiency. 4. Remove drip tray assembly by sliding it forward. Remove cover. Place tray and cover in dishwasher or wipe parts clean with a soft cloth and warm soapy water.
Model:A1213364VB Page 10 10. Once unit has drained, replace silicon plug and drain cap. Operation Not : in order to prevent compressor damage, the water cooler should stand upright for at least 4 hours. Make sure the water cooler is full filled with water before plugging in power. 1.
Model:A1213364VB Page 11 How to use digital display panel 1.Default temperature The default fridge temperature is 5℃. Note:The system will go back to default setting when power failed. 2. LCD display The temperature displayed is the storage temperature for food. But not the dynamic actual temperature inside the fridge. The lock icon is open means setting can be adjusted, if lock icon is closed means setting can not be changed to prevent naughty child changing the settings.
Model:A1213364VB Page 12 3.Customer setting Before making setting, unlock the child-safety lock by pressing the “SELECT” and “SET” concurrently for 3 seconds. Press the “SELECT” button by single touch,the digists will flash.To adjest the temperature you want by touching “SELECT” button to increase or by touching “SET” button to decrease the temperature.Note:the adjust range is from -1℃~10℃.
Model:A1213364VB Page 13 TROUBLESHOOTING SYMPTOMS POSSIBLE REASONS HOW TO SOLVE 1. There is no power or not plugged in. 2. Heating switch is “OFF”. No hot water 2. Turn on switch 3. Plugged into power while water dispenser is not filled with water and the protection thermostat of the heater is cut off due to dry burnt. 3. Wait for about one hour until the thermostat reset itself. 1. There is no power or not plugged in. 1. Plug in power. 2. First time cooling takes about 1 hour. No cold water 1.
Model:A1213364VB Page 14 LIMITED WARRANTY Electrotemp Technologies Inc., (“Vendor”) warrants to the original purchaser of this dispenser, and to no other person, that if this dispenser is assembled and operated in accordance with the printed instructions accompanying it, then for a period of ONE (1) years from the date of purchase, all parts in such dispenser shall be free from defects in material and workmanship.
名称:冰箱说明书A1213364VB(网上销售) 图号:5M009123X1 技术要求: 1.尺寸:143*210mm 2.单色印刷 3.产品符合Rosh要求 4.