Users Manual

7
WARNING
DO NOT pair another person’s meter with your Smartphone.
To pair the Smartphone with your meter, turn your meter on and follow these steps:
1. When you turn on your meter, Bluetooth will automatically turn on.
2. To turn on Bluetooth
®
on your Smartphone tap the Settings icon on the home
screen.
3. Next select Bluetooth and set Bluetooth to ON. Your devices are now
searching for each other.
4. Look for a device named BLE- VivaChek. This is your meter.
5. Tap on the entry that represents your VivaChek™ Eco BLE meter.
6. Enter your meter passcode using the keypad. The passcode is the last 5 digits
from the Serial Number on the back of your meter.
7. Tap Pair
8. Wait for the Smartphone status to say “Connected”. Congratulations! Your
meter and Smartphone are now paired. Before testing, you must now initially
sync the meter with the app.
NOTE: After successful pairing, the symbol will appear on the meter.
Initial syncing of the meter and app
You must initially sync the meter and app before you start testing your blood
glucose. The first time you sync, the Smartphone will set the clock in the meter.
However, you will not see the date and time on the meter display until after your
first test.
The Smartphone checks and updates the date and time in your meter each time
you sync. Check the date and time on your Smartphone often to be sure they are
correct. For instructions on setting the date and time on your Smartphone, see the
user manual for your Smartphone.
NOTE: It is important to sync the meter and app before testing for the first time.
This will ensure that the correct date and time are attached to your test results. Any
glucose results from tests taken before your initial Sync will not be assigned a date
or time, and will never be sent to the app.
1. Open the GlucoWell™ app on the Smartphone