User's Manual
Table Of Contents
- Copyright © 2004, Vivato, Inc.
- Who Should Read This Document?
- Printing This Document
- VIVATO, INC. END USER LIMITED WARRANTY AND LICENSE TERMS
- Safety Information
- FCC Declaration of Conformity
- Conventions Used in This Document
- Contact Information
- VIVATO, INC. END USER LIMITED WARRANTY AND LICENSE TERMS 3
- Safety Information 9
- Introduction 23
- Installation 29
- Initial Configuration Using the Built-In Web Pages 35
- Using the Main Configuration Web Pages 51
- Network Configuration Web Pages 55
- Security Configuration Web Pages 71
- Monitoring Clients and System Operations 79
- Services, Password, Config, and Firmware Web Pages 85
- Diagnostics Web Screen and Help 93
- Configuration Using The Command Line Interface 95
- Network Monitoring 145
- Verifying Wi-Fi Operation 149
- Dynamic Assignment of Client IP Addresses 153
- Updating AP/Bridge Firmware 159
- Introduction
- Powered Ethernet
- Omni-directional Antennas
- Ethernet and Serial Ports
- Reset To Factory Defaults
- Metal Enclosure
- IEEE 802.11 ISM-Band Channel Operation
- Multi-AP/Bridge Operation for Extended Coverage
- Basic Service Set Operation
- Web Page or Command Line Interface Configuration
- Network Configuration Examples
- Specifications
- Shipping Contents
- Installation
- Initial Configuration Using the Built-In Web Pages
- Using the Main Configuration Web Pages
- Network Configuration Web Pages
- Security Configuration Web Pages
Copyright © 2004, Vivato, Inc. Vivato Wi-Fi AP/Bridge User Guide 27
Specifications
Introduction
Specifications
The following specifications were accurate at the time that this document was released:
• Size 6.75” wide X 8.75” deep X 1.5” high.
• Connectors: One RJ-45 jack for 10/100 Ethernet connection; a nine-pin serial connector; a power
connector (plug-in AC adapter)
• Power Supply: Input power 120 VAC, 60 Hz., Output power: 12 VDC @ 1 Amp
• Operating temperature range 32 to 131F (0 to 55C)
• Radio Power output 200 mW
• Frequency 2.412 to 2.462 GHz
• Range Indoor:
• 300 ft at 11 Mbps
• 500 ft at 1 Mbps
• Antennas: Two RP-TNC connectors
• Operates license-free under FCC Part 15 and complies as a Class B computing device.
• Complies with DOC regulations.
Shipping Contents
The following items are included in the Vivato Wi-Fi AP/Bridge shipping container:
• Product invoice
• User Guide CD-ROM: Includes user documentation, support files, and a PDF copy of the
Command Line Interface Quick Reference (print using 11”x17” paper, landscape orientation,
2-sided). Go to the Vivato Customer Support website to download the latest documentation for
the AP/Bridge.
• Two antennas
• DB-9 null modem cable
• RJ-45 Crossover Ethernet cable
• Power supply
• AP/Bridge stand - allows the AP/Bridge to be positioned on its side when desired.
• Vivato Wi-Fi AP/Bridge