User's Manual
Table Of Contents
- Copyright © 2004, Vivato, Inc.
- Who Should Read This Document?
- Printing This Document
- VIVATO, INC. END USER LIMITED WARRANTY AND LICENSE TERMS
- Safety Information
- FCC Declaration of Conformity
- Conventions Used in This Document
- Contact Information
- VIVATO, INC. END USER LIMITED WARRANTY AND LICENSE TERMS 3
- Safety Information 9
- Introduction 23
- Installation 29
- Initial Configuration Using the Built-In Web Pages 35
- Using the Main Configuration Web Pages 51
- Network Configuration Web Pages 55
- Security Configuration Web Pages 71
- Monitoring Clients and System Operations 79
- Services, Password, Config, and Firmware Web Pages 85
- Diagnostics Web Screen and Help 93
- Configuration Using The Command Line Interface 95
- Network Monitoring 145
- Verifying Wi-Fi Operation 149
- Dynamic Assignment of Client IP Addresses 153
- Updating AP/Bridge Firmware 159
- Introduction
- Powered Ethernet
- Omni-directional Antennas
- Ethernet and Serial Ports
- Reset To Factory Defaults
- Metal Enclosure
- IEEE 802.11 ISM-Band Channel Operation
- Multi-AP/Bridge Operation for Extended Coverage
- Basic Service Set Operation
- Web Page or Command Line Interface Configuration
- Network Configuration Examples
- Specifications
- Shipping Contents
- Installation
- Initial Configuration Using the Built-In Web Pages
- Using the Main Configuration Web Pages
- Network Configuration Web Pages
- Security Configuration Web Pages
52 Vivato Wi-Fi AP/Bridge User Guide Copyright © 2004, Vivato, Inc.
Home
Using the Main Configuration Web Pages
Status Indicators
The following symbols are used to indicate the status of functions accessed on the configuration web
pages:
Home
The Home page is displayed each time the configuration web pages are accessed. The following settings
are accessed from the Home page sub-menus:
Home>Summary
The Summary page displays an overview of Wi-Fi AP/Bridge hardware and system configuration
(see "Accessing Settings From the Home Configuration Screen" on page 51).
System Information
This area displays an overview of the Wi-Fi AP/Bridge’s resources and operation.
• Hostname: The Hostname that you assigned.
• OS: Version of the Wi-Fi AP/Bridge’s software.
• wlan ESSID: The ESSID assigned to each wireless interface.
• Total Memory: Amount of memory in the AP/Bridge.
• Free Memory: Memory available for system use.
• Total Flash Memory: The total amount of flash memory used for storing the Wi-Fi
AP/Bridge’s firmware and configuration files.
• Free Flash Memory: The amount of flash memory available for storing another firmware
version and/or configuration files.
• Current Time: Time of day.
• Uptime: Length of time that the Wi-Fi AP/Bridge has been up since its last reboot.
• Average System Load: Percentage load on the system processor for the last minute, five
minutes, and 15 minutes.
indicates that the function is disabled.
indicates that the function is enabled.
click to edit this setting.