User's Manual
Table Of Contents
- Copyright © 2004, Vivato, Inc.
- Who Should Read This Document?
- Printing This Document
- VIVATO, INC. END USER LIMITED WARRANTY AND LICENSE TERMS
- Safety Information
- FCC Declaration of Conformity
- Conventions Used in This Document
- Contact Information
- VIVATO, INC. END USER LIMITED WARRANTY AND LICENSE TERMS 3
- Safety Information 9
- Introduction 23
- Installation 29
- Initial Configuration Using the Built-In Web Pages 35
- Using the Main Configuration Web Pages 51
- Network Configuration Web Pages 55
- Security Configuration Web Pages 71
- Monitoring Clients and System Operations 79
- Services, Password, Config, and Firmware Web Pages 85
- Diagnostics Web Screen and Help 93
- Configuration Using The Command Line Interface 95
- Network Monitoring 145
- Verifying Wi-Fi Operation 149
- Dynamic Assignment of Client IP Addresses 153
- Updating AP/Bridge Firmware 159
- Introduction
- Powered Ethernet
- Omni-directional Antennas
- Ethernet and Serial Ports
- Reset To Factory Defaults
- Metal Enclosure
- IEEE 802.11 ISM-Band Channel Operation
- Multi-AP/Bridge Operation for Extended Coverage
- Basic Service Set Operation
- Web Page or Command Line Interface Configuration
- Network Configuration Examples
- Specifications
- Shipping Contents
- Installation
- Initial Configuration Using the Built-In Web Pages
- Using the Main Configuration Web Pages
- Network Configuration Web Pages
- Security Configuration Web Pages
Copyright © 2004, Vivato, Inc. Vivato Wi-Fi AP/Bridge User Guide 53
Home
Using the Main Configuration Web Pages
Currently Associated Clients
This area displays the number of clients currently associating through each wireless interface.
Clicking on the number of clients value displays details for the associating client(s).
Network Information
This area displays the number of physical and logical interfaces that are present. Clicking on a
value takes you to the network settings used to configure the associated interface.
Monitoring Information
This area displays the status of simple network management protocol (SNMP) operation. Click
on Edit to access the configuration settings.
Security Information
This area displays the status of each type of security available in the Wi-Fi AP/Bridge. Click on
Edit to access the configuration settings.
Services Information
This area displays the status of the hypertext transfer protocol (HTTP) daemon, used to provide
access to the web interface, and the secure shell (SSH) daemon, used to provide access to the
command line interface using a secure shell program. Click on Edit to access the configuration
settings.
Home>Quick Setup
Displays the initial Quick Setup menu used when first configuring the Wi-Fi AP/Bridge. If you
selected Skip Setup when the Setup screen was first displayed, you can select the Quick Setup link to
return to the setup screens to make those initial configuration settings.