User's Manual Part 1
Table Of Contents
- Copyright © 2004, Vivato, Inc.
- Who Should Read This Document?
- Printing This Document
- VIVATO, INC. END USER LIMITED WARRANTY AND LICENSE TERMS
- Safety Information
- Conventions Used in This Document
- Contact Information
- VIVATO, INC. END USER LIMITED WARRANTY AND LICENSE TERMS 3
- Safety Information 9
- Introduction 23
- Installation 29
- Initial Configuration Using the Built-In Web Pages 35
- Using the Main Configuration Web Pages 51
- Network Configuration Web Pages 55
- Security Configuration Web Pages 71
- Monitoring Clients and System Operations 79
- Services, Password, Config, and Firmware Web Pages 85
- Diagnostics Web Screen and Help 93
- Configuration Using The Command Line Interface 95
- Network Monitoring 145
- Verifying Wi-Fi Operation 149
- Dynamic Assignment of Client IP Addresses 153
- Updating AP/Bridge Firmware 159
- Introduction
- Powered Ethernet
- Omni-directional Antennas
- Ethernet and Serial Ports
- Reset To Factory Defaults
- Metal Enclosure
- IEEE 802.11 ISM-Band Channel Operation
- Multi-AP/Bridge Operation for Extended Coverage
- Basic Service Set Operation
- Web Page or Command Line Interface Configuration
- Network Configuration Examples
- Specifications
- Shipping Contents
- Installation
- Initial Configuration Using the Built-In Web Pages
- Using the Main Configuration Web Pages
- Network Configuration Web Pages
- Security Configuration Web Pages
Copyright © 2004, Vivato, Inc. Vivato Wi-Fi AP/Bridge User Guide 55
Network Settings
Network Configuration Web Pages
Network Configuration Web Pages
The Network tab accesses screens for configuring all of the physical and logical interfaces within the
Wi-Fi AP/Bridge. Settings for changing IP addresses and wireless interface channel numbers, creating
bridges, and creating static IP routes are easily accessed.
Network Settings
Network settings are arranged on the following configuration pages:
• Network>Summary - Summary of current interface settings and routes.
• Network>General - Configuration of static routes, name servers, and hosts.
• Network>Bridge - Configuration of bridges.
• Network>DHCP - Configuration of a dynamic host control protocol (DHCP) server for
automatic IP addressing in clients.
• Network>Ethernet Interface - Configuration of the Ethernet interfaces.
• Network>Wireless Interfaces- Configuration of the wireless interfaces (channels, ESSID, bit
rate...)
• Network>WDS - Configuration of wireless distribution system (WDS) operation with a Vivato
Wi-Fi Base Station.