User's Manual Part 2
Table Of Contents
- Monitoring Clients and System Operations
- Services, Password, Config, and Firmware Web Pages
- Diagnostics Web Screen and Help
- Configuration Using The Command Line Interface
- Command Levels
- Connections and Terminal Settings
- Accessing the CLI
- Configuration Example
- Navigating the CLI
- Read Level Command Descriptions
- enable
- exit
- Ping
- Show Commands
- show arp
- show cpu
- show dhcp-server interface bridge <0-4094>
- show dhcp-server interface ethernet <0>
- show dhcp-server interface wireless <0-1>
- show eap
- show http-server
- show iccf
- show interfaces
- show interfaces bridge [0-4094]
- show interfaces bridge <0-4094> fdb
- show interfaces bridge <0-4094> stp
- show interfaces ethernet [0]
- show interfaces wireless [associations]
- show interfaces wireless <0-1> associations
- show interfaces wireless <0-1>
- show interfaces wireless < 0-1> wds <1-6>
- show ip domainname
- show ip host
- show ip hostname
- show ip nameserver
- show ip route
- show ip ssh
- show logging
- show memory
- show serial
- show snmp-server
- show uptime
- show version
- show wds
- show flash:
- show running-config
- traceroute
- Enable Level Command Descriptions
- configure [terminal]
- Commands for Managing Configuration Files
- Configure Crypto (Generate Keys) Commands
- Configure Enable Secret Commands
- Configure HTTP-Server Commands
- Configure Interface Commands
- interface bridge <0-4094>
- add interface ethernet <0>
- no add interface ethernet <0>
- add interface wireless < 0-1>
- no add interface wireless < 0-1>
- add interface wireless < 0-1> wds <1-6>
- aging-time <10-1000000 seconds>
- dhcp-server
- dhcp-server broadcast-address
- no dhcp-server broadcast-address
- dhcp-server domain-name
- no dhcp-server domain-name
- dhcp-server gateway
- no dhcp-server gateway
- dhcp-server ip-pool
- no dhcp-server ip-pool
- dhcp-server lease <1-4294967295>
- no dhcp-server lease <1-4294967295>
- dhcp-server name-server
- no dhcp-server name-server
- dhcp-server ntp-server
- no dhcp-server ntp-server
- dhcp-server wins
- no dhcp-server wins
- exit
- forward-time <4-200 seconds>
- no forward-time
- hello-time <1-10 seconds>
- no hello-time
- iccf
- no iccf
- ip address
[secondary] - no ip address
[secondary] - ip address dhcp
- no ip address dhcp
- ip address dhcp release
- ip address dhcp renew
- ip broadcast-address
[secondary] - ip routing
- no ip routing
- max-age <6-200 seconds>
- no max-age
- path-cost interface
<0-65535> - path-cost interface
wds <1-6> <0-65535> - priority <0-65535>
- shutdown
- no shutdown
- stp
- no stp
- show
- shutdown
- source-nat interface
|ethernet <0>|wireless < 0-1>|wireless <0-1> wds <1-6>>
- interface ethernet 0
- interface wireless < 0-1|all>
- beacon-interval <0-8191>
- channel <1-11>
- DHCP Server Operation
- disable beacon-essid
- no disable beacon-essid
- EAP Commands (802.1x security)
- eap
- eap secret <1-2>
- eap rekey-interval <60-1800>
- eap server <1-2>
- no eap
- no eap server
- essid
- exit
- iccf
- no iccf
- ip address
- ip address
secondary - no ip address
[secondary] - ip address dhcp
- no ip address dhcp
- ip address dhcp renew
- ip address dhcp release
- ip broadcast
[secondary] - no ip broadcast-address [secondary]
- ip routing
- no ip routing
- key
<1-4> - sensitivity <1-3>
- show
- shutdown
- no shutdown
- source-nat interface
|ethernet <0>|wireless < 0-1>> - wds
- wep <1-4>
- no wep
- interface bridge <0-4094>
- Configure No Interface Commands
- Configure IP Commands
- Configure Log Commands
- Configure Multicast/Broadcast Rate Limiting
- Configure SNMP-Server Commands
- snmp-server
- snmp-server bind interface (wireless < 0-1>|ethernet 0|bridge <0-4094>)
- snmp-server community
RO|RW [ ] - snmp-server contact
- snmp-server engineID
- snmp-server host
traps version 1 - snmp-server host
traps|informs version 2c - snmp-server host
traps|informs version 3 user [auth MD5|SHA [priv DES ]] - snmp-server location
- snmp-server name
- snmp-server user
[auth MD5|SHA [priv DES [ ]]]
- Configure No SNMP-Server Commands
- Configure Username Admin (Read Level) Secret
- Configure WDS (Wireless Distribution System)
- disable
- edit flash:
- exit
- no
- reboot
- support
- Network Monitoring
- Verifying Wi-Fi Operation
- Verification Process
- Wireless Client Does Not “Find” the Vivato Wi-Fi AP/Bridge
- Wireless Client Can’t Access Wi-Fi AP/Bridge Configuration Web Page
- Wireless Client Cannot Access the Local Wired Network
- Wireless Client Cannot Access an Outside Network
- Unauthorized Clients Are Able to Associate With The Wi-Fi AP/Bridge
- Connecting Through a WDS Connection
- Verification Process
- Dynamic Assignment of Client IP Addresses
- Updating AP/Bridge Firmware
- Index
98 Vivato Wi-Fi AP/Bridge User Guide Copyright © 2004, Vivato, Inc.
Accessing the CLI
Configuration Using The Command Line Interface
Accessing the Configuration Level
Use the following steps to access the enable level from the read level, and then access the global
level of the configuration settings:
1 At the vivato> prompt, enter enable.
2 The Wi-Fi AP/Bridge is shipped without an enable password. If you have created an enable
password (when using the Quick Setup web pages or by using the CLI), enter that password
when prompted.
3 Enter configure terminal to access the global configuration level. The prompt changes to
vivato (config)#. At this point you can start configuring the Wi-Fi AP/Bridge.
Figure 25—Accessing the Global Configuration Level