User's Manual Part 2
Table Of Contents
- Monitoring Clients and System Operations
- Services, Password, Config, and Firmware Web Pages
- Diagnostics Web Screen and Help
- Configuration Using The Command Line Interface
- Command Levels
- Connections and Terminal Settings
- Accessing the CLI
- Configuration Example
- Navigating the CLI
- Read Level Command Descriptions
- enable
- exit
- Ping
- Show Commands
- show arp
- show cpu
- show dhcp-server interface bridge <0-4094>
- show dhcp-server interface ethernet <0>
- show dhcp-server interface wireless <0-1>
- show eap
- show http-server
- show iccf
- show interfaces
- show interfaces bridge [0-4094]
- show interfaces bridge <0-4094> fdb
- show interfaces bridge <0-4094> stp
- show interfaces ethernet [0]
- show interfaces wireless [associations]
- show interfaces wireless <0-1> associations
- show interfaces wireless <0-1>
- show interfaces wireless < 0-1> wds <1-6>
- show ip domainname
- show ip host
- show ip hostname
- show ip nameserver
- show ip route
- show ip ssh
- show logging
- show memory
- show serial
- show snmp-server
- show uptime
- show version
- show wds
- show flash:
- show running-config
- traceroute
- Enable Level Command Descriptions
- configure [terminal]
- Commands for Managing Configuration Files
- Configure Crypto (Generate Keys) Commands
- Configure Enable Secret Commands
- Configure HTTP-Server Commands
- Configure Interface Commands
- interface bridge <0-4094>
- add interface ethernet <0>
- no add interface ethernet <0>
- add interface wireless < 0-1>
- no add interface wireless < 0-1>
- add interface wireless < 0-1> wds <1-6>
- aging-time <10-1000000 seconds>
- dhcp-server
- dhcp-server broadcast-address
- no dhcp-server broadcast-address
- dhcp-server domain-name
- no dhcp-server domain-name
- dhcp-server gateway
- no dhcp-server gateway
- dhcp-server ip-pool
- no dhcp-server ip-pool
- dhcp-server lease <1-4294967295>
- no dhcp-server lease <1-4294967295>
- dhcp-server name-server
- no dhcp-server name-server
- dhcp-server ntp-server
- no dhcp-server ntp-server
- dhcp-server wins
- no dhcp-server wins
- exit
- forward-time <4-200 seconds>
- no forward-time
- hello-time <1-10 seconds>
- no hello-time
- iccf
- no iccf
- ip address
[secondary] - no ip address
[secondary] - ip address dhcp
- no ip address dhcp
- ip address dhcp release
- ip address dhcp renew
- ip broadcast-address
[secondary] - ip routing
- no ip routing
- max-age <6-200 seconds>
- no max-age
- path-cost interface
<0-65535> - path-cost interface
wds <1-6> <0-65535> - priority <0-65535>
- shutdown
- no shutdown
- stp
- no stp
- show
- shutdown
- source-nat interface
|ethernet <0>|wireless < 0-1>|wireless <0-1> wds <1-6>>
- interface ethernet 0
- interface wireless < 0-1|all>
- beacon-interval <0-8191>
- channel <1-11>
- DHCP Server Operation
- disable beacon-essid
- no disable beacon-essid
- EAP Commands (802.1x security)
- eap
- eap secret <1-2>
- eap rekey-interval <60-1800>
- eap server <1-2>
- no eap
- no eap server
- essid
- exit
- iccf
- no iccf
- ip address
- ip address
secondary - no ip address
[secondary] - ip address dhcp
- no ip address dhcp
- ip address dhcp renew
- ip address dhcp release
- ip broadcast
[secondary] - no ip broadcast-address [secondary]
- ip routing
- no ip routing
- key
<1-4> - sensitivity <1-3>
- show
- shutdown
- no shutdown
- source-nat interface
|ethernet <0>|wireless < 0-1>> - wds
- wep <1-4>
- no wep
- interface bridge <0-4094>
- Configure No Interface Commands
- Configure IP Commands
- Configure Log Commands
- Configure Multicast/Broadcast Rate Limiting
- Configure SNMP-Server Commands
- snmp-server
- snmp-server bind interface (wireless < 0-1>|ethernet 0|bridge <0-4094>)
- snmp-server community
RO|RW [ ] - snmp-server contact
- snmp-server engineID
- snmp-server host
- snmp-server host
- snmp-server host
[auth MD5|SHA [priv DES ]] - snmp-server location
- snmp-server name
- snmp-server user
[auth MD5|SHA [priv DES [ ]]]
- Configure No SNMP-Server Commands
- Configure Username Admin (Read Level) Secret
- Configure WDS (Wireless Distribution System)
- disable
- edit flash:
- exit
- no
- reboot
- support
- Network Monitoring
- Verifying Wi-Fi Operation
- Verification Process
- Wireless Client Does Not “Find” the Vivato Wi-Fi AP/Bridge
- Wireless Client Can’t Access Wi-Fi AP/Bridge Configuration Web Page
- Wireless Client Cannot Access the Local Wired Network
- Wireless Client Cannot Access an Outside Network
- Unauthorized Clients Are Able to Associate With The Wi-Fi AP/Bridge
- Connecting Through a WDS Connection
- Verification Process
- Dynamic Assignment of Client IP Addresses
- Updating AP/Bridge Firmware
- Index
106 Vivato Wi-Fi AP/Bridge User Guide Copyright © 2004, Vivato, Inc.
Read Level Command Descriptions
Configuration Using The Command Line Interface
For information on RX and TX packet statistics, see show interfaces wireless <0-1>.
Figure 29—Example “show interfaces bridge” Output
show interfaces bridge <0-4094> fdb
Enter the number of a bridge to display the source MAC addresses of packets that have been
forwarded through that bridge over any of its interfaces; also called the forwarding data base.
The length of time that the data is stored in that data base is determined by the aging-time
<10-1000000 seconds> command. A “local” device indicates an interface that is part of this
bridge.
Figure 30—Example “show interfaces bridge 0 fdb” Output
show interfaces bridge <0-4094> stp
Enter the number of a bridge to display the status of spanning tree protocol (STP) on that bridge:
enabled or disabled.
show interfaces ethernet [0]
Displays the configuration for the ethernet interface, including the IP address (if assigned) and
broadcast address, MAC address (HWaddr), bridges that this interface is part of, and transmit
and receive packet statistics.
Also shown is the status of that interface. When the interface is enabled, “UP BROADCAST
RUNNING MULTICAST” is displayed. If the interface is disabled, the “UP” part is removed
(“BROADCAST RUNNING MULTICAST”).
Vivato#show interfaces bridge 0
br0 Link encap:Ethernet HWaddr 00:0B:33:00:60:00
inet addr:192.163.20.1 Bcast:192.163.20.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500
RX packets:3779 error:0 dropped:0 overruns:0 frame:0
TX packets:42 error:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
Interrupt:0 Base address::
Bridge ID:8000.000b33006000, STP:Disabled
Interface: eth0, eth1, wlan1, wlan2, wlan3, wlan4, wlan5, wlan6
Vivato#
“UP” Signifies that this
interface is enabled.
Vivato#show interfaces bridge 0 fdb
br0:
port no mac addr is local? ageing timer
1 00:09:6b:e0:9e:bf no 7.59
1 00:09:7c:45:5b:8f no 0.27
1 00:0b:33:00:60:00 yes 0.00
2 00:0b:33:00:60:01 yes 0.00
3 00:0b:33:00:60:09 yes 0.00