User's Manual Part 2
Table Of Contents
- Monitoring Clients and System Operations
- Services, Password, Config, and Firmware Web Pages
- Diagnostics Web Screen and Help
- Configuration Using The Command Line Interface
- Command Levels
- Connections and Terminal Settings
- Accessing the CLI
- Configuration Example
- Navigating the CLI
- Read Level Command Descriptions
- enable
- exit
- Ping
- Show Commands
- show arp
- show cpu
- show dhcp-server interface bridge <0-4094>
- show dhcp-server interface ethernet <0>
- show dhcp-server interface wireless <0-1>
- show eap
- show http-server
- show iccf
- show interfaces
- show interfaces bridge [0-4094]
- show interfaces bridge <0-4094> fdb
- show interfaces bridge <0-4094> stp
- show interfaces ethernet [0]
- show interfaces wireless [associations]
- show interfaces wireless <0-1> associations
- show interfaces wireless <0-1>
- show interfaces wireless < 0-1> wds <1-6>
- show ip domainname
- show ip host
- show ip hostname
- show ip nameserver
- show ip route
- show ip ssh
- show logging
- show memory
- show serial
- show snmp-server
- show uptime
- show version
- show wds
- show flash:
- show running-config
- traceroute
- Enable Level Command Descriptions
- configure [terminal]
- Commands for Managing Configuration Files
- Configure Crypto (Generate Keys) Commands
- Configure Enable Secret Commands
- Configure HTTP-Server Commands
- Configure Interface Commands
- interface bridge <0-4094>
- add interface ethernet <0>
- no add interface ethernet <0>
- add interface wireless < 0-1>
- no add interface wireless < 0-1>
- add interface wireless < 0-1> wds <1-6>
- aging-time <10-1000000 seconds>
- dhcp-server
- dhcp-server broadcast-address
- no dhcp-server broadcast-address
- dhcp-server domain-name
- no dhcp-server domain-name
- dhcp-server gateway
- no dhcp-server gateway
- dhcp-server ip-pool
- no dhcp-server ip-pool
- dhcp-server lease <1-4294967295>
- no dhcp-server lease <1-4294967295>
- dhcp-server name-server
- no dhcp-server name-server
- dhcp-server ntp-server
- no dhcp-server ntp-server
- dhcp-server wins
- no dhcp-server wins
- exit
- forward-time <4-200 seconds>
- no forward-time
- hello-time <1-10 seconds>
- no hello-time
- iccf
- no iccf
- ip address
[secondary] - no ip address
[secondary] - ip address dhcp
- no ip address dhcp
- ip address dhcp release
- ip address dhcp renew
- ip broadcast-address
[secondary] - ip routing
- no ip routing
- max-age <6-200 seconds>
- no max-age
- path-cost interface
<0-65535> - path-cost interface
wds <1-6> <0-65535> - priority <0-65535>
- shutdown
- no shutdown
- stp
- no stp
- show
- shutdown
- source-nat interface
|ethernet <0>|wireless < 0-1>|wireless <0-1> wds <1-6>>
- interface ethernet 0
- interface wireless < 0-1|all>
- beacon-interval <0-8191>
- channel <1-11>
- DHCP Server Operation
- disable beacon-essid
- no disable beacon-essid
- EAP Commands (802.1x security)
- eap
- eap secret <1-2>
- eap rekey-interval <60-1800>
- eap server <1-2>
- no eap
- no eap server
- essid
- exit
- iccf
- no iccf
- ip address
- ip address
secondary - no ip address
[secondary] - ip address dhcp
- no ip address dhcp
- ip address dhcp renew
- ip address dhcp release
- ip broadcast
[secondary] - no ip broadcast-address [secondary]
- ip routing
- no ip routing
- key
<1-4> - sensitivity <1-3>
- show
- shutdown
- no shutdown
- source-nat interface
|ethernet <0>|wireless < 0-1>> - wds
- wep <1-4>
- no wep
- interface bridge <0-4094>
- Configure No Interface Commands
- Configure IP Commands
- Configure Log Commands
- Configure Multicast/Broadcast Rate Limiting
- Configure SNMP-Server Commands
- snmp-server
- snmp-server bind interface (wireless < 0-1>|ethernet 0|bridge <0-4094>)
- snmp-server community
RO|RW [ - snmp-server contact
- snmp-server engineID
- snmp-server host
traps version 1 - snmp-server host
traps|informs version 2c - snmp-server host
traps|informs version 3 user [auth MD5|SHA [priv DES ]] - snmp-server location
- snmp-server name
- snmp-server user
[auth MD5|SHA [priv DES [ ]]]
- Configure No SNMP-Server Commands
- Configure Username Admin (Read Level) Secret
- Configure WDS (Wireless Distribution System)
- disable
- edit flash:
- exit
- no
- reboot
- support
- Network Monitoring
- Verifying Wi-Fi Operation
- Verification Process
- Wireless Client Does Not “Find” the Vivato Wi-Fi AP/Bridge
- Wireless Client Can’t Access Wi-Fi AP/Bridge Configuration Web Page
- Wireless Client Cannot Access the Local Wired Network
- Wireless Client Cannot Access an Outside Network
- Unauthorized Clients Are Able to Associate With The Wi-Fi AP/Bridge
- Connecting Through a WDS Connection
- Verification Process
- Dynamic Assignment of Client IP Addresses
- Updating AP/Bridge Firmware
- Index
112 Vivato Wi-Fi AP/Bridge User Guide Copyright © 2004, Vivato, Inc.
Read Level Command Descriptions
Configuration Using The Command Line Interface
show serial
Displays the product serial number.
show snmp-server
Displays simple network management protocol (SNMP) server status and configuration, such
as the name, location, contact name, public and private community names, and host IP
addresses.
Figure 33—Example “show snmp-server” Output
show uptime
Displays the of day, how long the AP/Bridge has been up since it was last rebooted (days, hours,
minutes), the number of users that have accessed the AP/Bridge, and the average load through
the AP/Bridge.
show version
Displays the product serial number, base MAC address for the Wi-FI AP/Bridge, and the
versions of software (“Vino Version”).
Enable Level Show Commands
The following Show commands are only available at the enable level:
show wds
Display the wireless distribution system (WDS) connections that have been created and the peer
MAC addresses that have been assigned to them.
harvey(config)#show snmp-server
snmp-server contact george
snmp-server location upstairs closet
snmp-server name clydesdale
snmp-server community public RO
snmp-server community private RW
snmp-server community icehouse RW 192.163.20.1
snmp-server engineID A52D
snmp-server
!
harvey(config)#