User's Manual Part 2
Table Of Contents
- Monitoring Clients and System Operations
- Services, Password, Config, and Firmware Web Pages
- Diagnostics Web Screen and Help
- Configuration Using The Command Line Interface
- Command Levels
- Connections and Terminal Settings
- Accessing the CLI
- Configuration Example
- Navigating the CLI
- Read Level Command Descriptions
- enable
- exit
- Ping
- Show Commands
- show arp
- show cpu
- show dhcp-server interface bridge <0-4094>
- show dhcp-server interface ethernet <0>
- show dhcp-server interface wireless <0-1>
- show eap
- show http-server
- show iccf
- show interfaces
- show interfaces bridge [0-4094]
- show interfaces bridge <0-4094> fdb
- show interfaces bridge <0-4094> stp
- show interfaces ethernet [0]
- show interfaces wireless [associations]
- show interfaces wireless <0-1> associations
- show interfaces wireless <0-1>
- show interfaces wireless < 0-1> wds <1-6>
- show ip domainname
- show ip host
- show ip hostname
- show ip nameserver
- show ip route
- show ip ssh
- show logging
- show memory
- show serial
- show snmp-server
- show uptime
- show version
- show wds
- show flash:
- show running-config
- traceroute
- Enable Level Command Descriptions
- configure [terminal]
- Commands for Managing Configuration Files
- Configure Crypto (Generate Keys) Commands
- Configure Enable Secret Commands
- Configure HTTP-Server Commands
- Configure Interface Commands
- interface bridge <0-4094>
- add interface ethernet <0>
- no add interface ethernet <0>
- add interface wireless < 0-1>
- no add interface wireless < 0-1>
- add interface wireless < 0-1> wds <1-6>
- aging-time <10-1000000 seconds>
- dhcp-server
- dhcp-server broadcast-address
- no dhcp-server broadcast-address
- dhcp-server domain-name
- no dhcp-server domain-name
- dhcp-server gateway
- no dhcp-server gateway
- dhcp-server ip-pool
- no dhcp-server ip-pool
- dhcp-server lease <1-4294967295>
- no dhcp-server lease <1-4294967295>
- dhcp-server name-server
- no dhcp-server name-server
- dhcp-server ntp-server
- no dhcp-server ntp-server
- dhcp-server wins
- no dhcp-server wins
- exit
- forward-time <4-200 seconds>
- no forward-time
- hello-time <1-10 seconds>
- no hello-time
- iccf
- no iccf
- ip address
[secondary] - no ip address
[secondary] - ip address dhcp
- no ip address dhcp
- ip address dhcp release
- ip address dhcp renew
- ip broadcast-address
[secondary] - ip routing
- no ip routing
- max-age <6-200 seconds>
- no max-age
- path-cost interface
<0-65535> - path-cost interface
wds <1-6> <0-65535> - priority <0-65535>
- shutdown
- no shutdown
- stp
- no stp
- show
- shutdown
- source-nat interface
|ethernet <0>|wireless < 0-1>|wireless <0-1> wds <1-6>>
- interface ethernet 0
- interface wireless < 0-1|all>
- beacon-interval <0-8191>
- channel <1-11>
- DHCP Server Operation
- disable beacon-essid
- no disable beacon-essid
- EAP Commands (802.1x security)
- eap
- eap secret <1-2>
- eap rekey-interval <60-1800>
- eap server <1-2>
- no eap
- no eap server
- essid
- exit
- iccf
- no iccf
- ip address
- ip address
secondary - no ip address
[secondary] - ip address dhcp
- no ip address dhcp
- ip address dhcp renew
- ip address dhcp release
- ip broadcast
[secondary] - no ip broadcast-address [secondary]
- ip routing
- no ip routing
- key
<1-4> - sensitivity <1-3>
- show
- shutdown
- no shutdown
- source-nat interface
|ethernet <0>|wireless < 0-1>> - wds
- wep <1-4>
- no wep
- interface bridge <0-4094>
- Configure No Interface Commands
- Configure IP Commands
- Configure Log Commands
- Configure Multicast/Broadcast Rate Limiting
- Configure SNMP-Server Commands
- snmp-server
- snmp-server bind interface (wireless < 0-1>|ethernet 0|bridge <0-4094>)
- snmp-server community
RO|RW [ ] - snmp-server contact
- snmp-server engineID
- snmp-server host
- snmp-server host
- snmp-server host
[auth MD5|SHA [priv DES ]] - snmp-server location
- snmp-server name
- snmp-server user
[auth MD5|SHA [priv DES [ ]]]
- Configure No SNMP-Server Commands
- Configure Username Admin (Read Level) Secret
- Configure WDS (Wireless Distribution System)
- disable
- edit flash:
- exit
- no
- reboot
- support
- Network Monitoring
- Verifying Wi-Fi Operation
- Verification Process
- Wireless Client Does Not “Find” the Vivato Wi-Fi AP/Bridge
- Wireless Client Can’t Access Wi-Fi AP/Bridge Configuration Web Page
- Wireless Client Cannot Access the Local Wired Network
- Wireless Client Cannot Access an Outside Network
- Unauthorized Clients Are Able to Associate With The Wi-Fi AP/Bridge
- Connecting Through a WDS Connection
- Verification Process
- Dynamic Assignment of Client IP Addresses
- Updating AP/Bridge Firmware
- Index
Copyright © 2004, Vivato, Inc. Vivato Wi-Fi AP/Bridge User Guide 141
Enable Level Command Descriptions
Configuration Using The Command Line Interface
ip address dhcp release
Enter this command to send a request to the DHCP server to release the IP address used by this
interface and allow it to be reassigned.
ip broadcast-address <ip address> [secondary]
Enter the broadcast IP address for this WDS connection. The optional “secondary” entry is used
to create a secondary broadcast IP address for this WDS connection.
no ip broadcast-address <ip address> [secondary]
Enter the previously assigned broadcast IP address to remove it from this WDS interface. Use
the “secondary” option to remove a secondary broadcast IP address.
peer-address <mac address>
Enter the MAC address of the wireless interface on the Wi-Fi Base Station that is being used for
a WDS link to the AP/Bridge (in the format 00:0B:33:31:85:A3).
A peer MAC address can only be used with one WDS connection on any wireless interface.
shutdown
Enter this command to disable this WDS connection.
no shutdown
Enable this WDS connection.