User's Manual Part 2
Table Of Contents
- Monitoring Clients and System Operations
- Services, Password, Config, and Firmware Web Pages
- Diagnostics Web Screen and Help
- Configuration Using The Command Line Interface
- Command Levels
- Connections and Terminal Settings
- Accessing the CLI
- Configuration Example
- Navigating the CLI
- Read Level Command Descriptions
- enable
- exit
- Ping
- Show Commands
- show arp
- show cpu
- show dhcp-server interface bridge <0-4094>
- show dhcp-server interface ethernet <0>
- show dhcp-server interface wireless <0-1>
- show eap
- show http-server
- show iccf
- show interfaces
- show interfaces bridge [0-4094]
- show interfaces bridge <0-4094> fdb
- show interfaces bridge <0-4094> stp
- show interfaces ethernet [0]
- show interfaces wireless [associations]
- show interfaces wireless <0-1> associations
- show interfaces wireless <0-1>
- show interfaces wireless < 0-1> wds <1-6>
- show ip domainname
- show ip host
- show ip hostname
- show ip nameserver
- show ip route
- show ip ssh
- show logging
- show memory
- show serial
- show snmp-server
- show uptime
- show version
- show wds
- show flash:
- show running-config
- traceroute
- Enable Level Command Descriptions
- configure [terminal]
- Commands for Managing Configuration Files
- Configure Crypto (Generate Keys) Commands
- Configure Enable Secret Commands
- Configure HTTP-Server Commands
- Configure Interface Commands
- interface bridge <0-4094>
- add interface ethernet <0>
- no add interface ethernet <0>
- add interface wireless < 0-1>
- no add interface wireless < 0-1>
- add interface wireless < 0-1> wds <1-6>
- aging-time <10-1000000 seconds>
- dhcp-server
- dhcp-server broadcast-address
- no dhcp-server broadcast-address
- dhcp-server domain-name
- no dhcp-server domain-name
- dhcp-server gateway
- no dhcp-server gateway
- dhcp-server ip-pool
- no dhcp-server ip-pool
- dhcp-server lease <1-4294967295>
- no dhcp-server lease <1-4294967295>
- dhcp-server name-server
- no dhcp-server name-server
- dhcp-server ntp-server
- no dhcp-server ntp-server
- dhcp-server wins
- no dhcp-server wins
- exit
- forward-time <4-200 seconds>
- no forward-time
- hello-time <1-10 seconds>
- no hello-time
- iccf
- no iccf
- ip address
[secondary] - no ip address
[secondary] - ip address dhcp
- no ip address dhcp
- ip address dhcp release
- ip address dhcp renew
- ip broadcast-address
[secondary] - ip routing
- no ip routing
- max-age <6-200 seconds>
- no max-age
- path-cost interface
<0-65535> - path-cost interface
wds <1-6> <0-65535> - priority <0-65535>
- shutdown
- no shutdown
- stp
- no stp
- show
- shutdown
- source-nat interface
|ethernet <0>|wireless < 0-1>|wireless <0-1> wds <1-6>>
- interface ethernet 0
- interface wireless < 0-1|all>
- beacon-interval <0-8191>
- channel <1-11>
- DHCP Server Operation
- disable beacon-essid
- no disable beacon-essid
- EAP Commands (802.1x security)
- eap
- eap secret <1-2>
- eap rekey-interval <60-1800>
- eap server <1-2>
- no eap
- no eap server
- essid
- exit
- iccf
- no iccf
- ip address
- ip address
secondary - no ip address
[secondary] - ip address dhcp
- no ip address dhcp
- ip address dhcp renew
- ip address dhcp release
- ip broadcast
[secondary] - no ip broadcast-address [secondary]
- ip routing
- no ip routing
- key
<1-4> - sensitivity <1-3>
- show
- shutdown
- no shutdown
- source-nat interface
|ethernet <0>|wireless < 0-1>> - wds
- wep <1-4>
- no wep
- interface bridge <0-4094>
- Configure No Interface Commands
- Configure IP Commands
- Configure Log Commands
- Configure Multicast/Broadcast Rate Limiting
- Configure SNMP-Server Commands
- snmp-server
- snmp-server bind interface (wireless < 0-1>|ethernet 0|bridge <0-4094>)
- snmp-server community
RO|RW [ - snmp-server contact
- snmp-server engineID
- snmp-server host
traps version 1 - snmp-server host
traps|informs version 2c - snmp-server host
traps|informs version 3 user [auth MD5|SHA [priv DES ]] - snmp-server location
- snmp-server name
- snmp-server user
[auth MD5|SHA [priv DES [ ]]]
- Configure No SNMP-Server Commands
- Configure Username Admin (Read Level) Secret
- Configure WDS (Wireless Distribution System)
- disable
- edit flash:
- exit
- no
- reboot
- support
- Network Monitoring
- Verifying Wi-Fi Operation
- Verification Process
- Wireless Client Does Not “Find” the Vivato Wi-Fi AP/Bridge
- Wireless Client Can’t Access Wi-Fi AP/Bridge Configuration Web Page
- Wireless Client Cannot Access the Local Wired Network
- Wireless Client Cannot Access an Outside Network
- Unauthorized Clients Are Able to Associate With The Wi-Fi AP/Bridge
- Connecting Through a WDS Connection
- Verification Process
- Dynamic Assignment of Client IP Addresses
- Updating AP/Bridge Firmware
- Index
Copyright © 2004, Vivato, Inc. Vivato Wi-Fi AP/Bridge User Guide 149
Verification Process
Verifying Wi-Fi Operation
Verifying Wi-Fi Operation
After installing and configuring the Vivato Wi-Fi AP/Bridge, it is important to verify that it operates as
intended. The information in this section is intended to help you verify Wi-Fi AP/Bridge operation and
provides ideas to troubleshoot any configuration problems that you may have.
Use your Wi-Fi client’s documentation to understand its configuration settings.
Verification Process
Use the following flowchart to verify Wi-Fi AP/Bridge operation and to identify some of the possible
causes of problems you may encounter:
Wireless Interface ESSID
Found By Client?
No
Yes
Configuration Page Accessible
Using Client?
No
Yes
Local Wired Network Accessible
Using Client?
Yes
No
Outside Network (Internet)
Accessib le U sing C lient?
Yes
No
Unauthorized Clients Able to
Associate With the Wi-Fi
Switch?
No
Yes
Wi-Fi Switch Configuration is
Complete, Connected to LAN,
and Wi-Fi Client is Enabled.
You are up and running! Enjoy
Wi-Fi Everywhere!
See "Wireless Client Does Not “Find” the Vivato Wi-Fi
AP/Bridge" on page 150.
See "Wireless Client Can’t Access Wi-Fi AP/Bridge
Configuration Web Page" on page 151.
See "Wireless Client Cannot Access the Local Wired
Network" on page 151.
See "Wireless Client Cannot Access an Outside
Network" on page 152.
See "Unauthorized Clients Are Able to Associate With
The Wi-Fi AP/Bridge" on page 152.