User’s Manual Item: V60067BT
Important Safety Precautions When using your Suitcase Turntable Wireless Speaker, basic safety precautions should always be followed, including the following: 1. READ ALL INSTRUCTIONS BEFORE USING YOUR SPEAKER, AND KEEP FOR FUTURE REFERENCE. 2. Do not allow children or the infirm to play with your speaker without adult supervision. 3. Do not expose your speaker to excessive heat, flames or fire. 4. Always press all buttons carefully. Do not manhandle your speaker. 5.
Introduction Thank you for purchasing the Vivitar Suitcase Turntable Wireless Speaker, item V60067BT. Listen to all of your favorite vintage records with this compact, portable device. In order to get the best results, please read this manual closely before using. Package Contents -Suitcase Record Player -Power Adapter -User’s Manual with Warranty Information Specifications AC/DC Adapter: Input: 100-240V, 50/60Hz, 0.
A Quick Look at Your Device 45 RPM Adapter Lift Lever Arm Clip Auto/Manual Stop Selection Switch Line In Jack Function Knob Speed Selection Switch Power/Volume Knob LED Light Indicator Headphone Jack Turntable Platter Turntable Shaft Stylus Cartridge Arm
A Quick Look at Your Device (continued) Buckle Speaker Speaker Handle RCA Output Jack Power Adapter Jack
Powering Your Device In order to power your device, connect one end of the included power adapter into a suitable power outlet in your home. Insert the other end into the POWER ADAPTER JACK on the rear of your device.
Using Your Device to Play a Record 1. Open your turntable by lifting the external BUCKLE and lifting the top lid. 2. Rotate the FUNCTION KNOB until it is in the PHONO position. 3. Power on your unit by rotating the POWER/VOLUME KNOB in a clockwise direction. Once powered on, the LED LIGHT INDICATOR will turn red. 4. Place a record on the TURNTABLE PLATTER. Select the desired speed (33 1/3, 45, 78) by sliding the SPEED SELECTION SWITCH in the appropriate direction for your record.
Replacing the Turntable Needle Removing the Stylus from the Cartridge 1. Set a screwdriver at the tip of the stylus and push down (see graphic A to the right). WARNING: Do not apply to much pressure when applying force to the stylus. Doing so can cause the stylus to break. 2. Pull the stylus out. (see graphic B to the right). Installing the Stylus 1. Hold the tip of the stylus and insert the other edge by pressing towards point C. (See graphic to the right). 2.
Bluetooth Pairing FUNCTION KNOB POWER/VOLUME KNOB 1. Power on your unit by rotating the POWER/VOLUME KNOB in a clockwise direction. 2. Rotate the FUNCTION KNOB until it is in the BT position. Pairing Mode Blue Flashing LED V60067BT Paired Blue LED 3. Go to the Bluetooth settings menu on your phone. Make sure that Bluetooth is turned on. Connect to the device listed as “V60067BT.” 4.
LINE IN FUNCTION/RCA OUTPUT Insert one end of a 3.5mm audio cable (not included) into the LINE IN JACK and connect the other end into an external audio source. Line In Jack Rotate the FUNCTION KNOB until it is in the LINE IN position. The LED Indicator Light will turn purple, indicating that your turntable’s speakers will play audio from your external audio source.
HEADPHONE JACK For a more quiet listening experience plug headphones into your turntable’s HEADPHONE JACK. When headphones are plugged in, music will automatically play on your headphones, and your turntable’s speakers will be muted.
Maintenance and Care -Use a soft cloth or paper towel to clean your speaker. Never use any harsh chemicals or detergents for cleaning. Make sure your speaker is dry before charging. -When your speaker is not in use, it should be stored in a cool, dry place. -Never tug or yank on a cable while it is connected to your speaker. Connect and disconnect cables as carefully as possible. -Never expose your speaker to high temperatures, extreme cold.
FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Vivitar One Year Warranty This warranty covers the original consumer purchaser only and is not transferable. This warranty covers products that fail to function properly UNDER NORMAL USAGE, due to defects in material or workmanship. Your product will be repaired or replaced at no charge for parts or labor for a period of one year.
Vivitar One Year Warranty (continued) NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OTHER THAN THOSE EXPRESSLY DESCRIBED ABOVE SHALL APPLY. DISTRIBUTOR FURTHER DISCLAIMS ALL WARRANTIES AFTER THE EXPRESS WARRANTY PERIOD STATED ABOVE. NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR ENTITY WITH RESPECT TO THE PRODUCT SHALL BE BINDING ON DISTRIBUTOR.
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Sakar International is under license. Other trademarks and trade names are those of their respective owners.
