User's Manual

Using Your Device to Play a Record
1. Open your turntable by lifting the external BUCKLE and lifting the top lid.
2. Rotate the FUNCTION KNOB until it is in the PHONO position.
3. Power on your unit by rotating the POWER/VOLUME KNOB in a clockwise direction. Once
powered on, the LED LIGHT INDICATOR will turn red.
4. Place a record on the TURNTABLE PLATTER. Select the desired speed (33 1/3, 45, 78) by
sliding the SPEED SELECTION SWITCH in the appropriate direction for your record. Note that
when playing a 45 RPM record, you can use the included 45 RPM ADAPTER located in the
holder next to the TURNTABLE PLATTER.
5. Open the ARM CLIP in order to release the ARM. Push the LIFT LEVER backwards to raise
the ARM. Gently move the ARM to the desired position over the record. The turntable will
begin to spin when the ARM is towards the record. Push the LIFT LEVER forward and lower
the ARM slowly on the desired position on the record to begin playing.
NOTE: The record will begin to spin only when the ARM is moved over the record if the AUTO
STOP is turned ON.
6. If the AUTO/MANUAL STOP SELECTION SWITCH is turned ON, the record will stop automati-
cally when finished. If the switch is turned OFF the record will NOT stop automatically when
finished.
7. To adjust the volume level, rotate the VOLUME KNOB.