User's Manual

Replacing the Turntable Needle
Removing the Stylus from the Cartridge
1. Set a screwdriver at the tip of the stylus and push down (see
graphic A to the right).
WARNING: Do not apply to much pressure when applying force to the
stylus. Doing so can cause the stylus to break.
2. Pull the stylus out. (see graphic B to the right).
Installing the Stylus
1. Hold the tip of the stylus and insert the other edge by pressing
towards point C. (See graphic to the right).
2. Push the stylus up towards direction D (See graphic to the right) until
it locks at the tip.
WARNING:
--Do not bend the stylus needle.
--Do not touch the needle to avoid injury to your hand.
--Turn off the unit’s power before you replace the stylus.
NOTE: The stylus typically lasts around 50 hours under normal use. It is
recommended that the stylus be replaced as soon as you notice a
change in sound quality.
When replacing the needle, use replacement needle ITNP-S1.