Operation Manual
Table Of Contents
- cam binoculars pg 1
- cam binoculars pg 2
- cam binoculars pg 3
- cam binoculars pg 4
- cam binoculars pg 5
- cam binoculars pg 6
- cam binoculars pg 7
- cam binoculars pg 8
- cam binoculars pg 9
- cam binoculars pg 10
- cam binoculars pg 11
- cam binoculars pg 12
- cam binoculars pg 13
- cam binoculars pg 14
- cam binoculars pg 15
- cam binoculars pg 16
- cam binoculars pg 17
- cam binoculars pg 18
- cam binoculars pg 19
- cam binoculars pg 20
- cam binoculars pg 21
- cam binoculars pg 22
- cam binoculars pg 23
- cam binoculars pg 24
Software and Camera Driver Installation
-14-
IMPORTANT: Before attempting to install the software, ensure that you do not have the camera
attached to your computer. This will aect the installation process and could cause your installation
to fail. Do not connect the cable to the computer until the entire installation process has been
completed. We recommend following the step by step instructions that will appear on your screen
during the installation process.
1. Insert the CD into your CD-Rom drive. Make sure that your camera is not connected to the
computer.
2. On the “Install your camera software” screen, select your camera model from the drop down
list and click the “Install” button to install PhoTags Express followed by the installation of PhoTags
WebCam Express and your camera driver.