Operation Manual
Table Of Contents
- cam binoculars pg 1
- cam binoculars pg 2
- cam binoculars pg 3
- cam binoculars pg 4
- cam binoculars pg 5
- cam binoculars pg 6
- cam binoculars pg 7
- cam binoculars pg 8
- cam binoculars pg 9
- cam binoculars pg 10
- cam binoculars pg 11
- cam binoculars pg 12
- cam binoculars pg 13
- cam binoculars pg 14
- cam binoculars pg 15
- cam binoculars pg 16
- cam binoculars pg 17
- cam binoculars pg 18
- cam binoculars pg 19
- cam binoculars pg 20
- cam binoculars pg 21
- cam binoculars pg 22
- cam binoculars pg 23
- cam binoculars pg 24
Starting Your Camera
-7-
Press and hold down the mode button (for about 2 seconds) to start the camera.
• The camera will sound a beep to confirm that it is ready for use.
• The LCD display will indicate the number of photos that can be taken before it becomes necessary to
download them to your PC.
Taking Photos
1. Compose your shot using the viewfinder. Be sure to keep the camera very still to avoid blurriness.
2. Hold the camera steady and press the shutter button to take a photo.
3. The camera will beep when a photo is taken.
If the camera fails to beep or if a "0" appears on the LCD this is an indication that the memory is
full in which event no further photos can be taken until the existing photos have been
downloaded or cleared from the camera’s memory.
Note: The LCD display indicates how many photos may still be taken at the current resolution
and compression. E.g. In "Lr" resolution and "CP" compression 160 images may be taken.
However the LCD counter only displays up to 99. It will continue to display 99 until less than
99 images may still be taken.