Use And Care Manual

CAMERA SETUP

2. Wait as your camera gets ready to enter Wi-Fi setup mode. This

might take up to a minute.

3. Once in Wi-Fi setup mode, your camera will emit a prompt

musical melody and then beep every few seconds.

NOTE: If you are having trouble connecting to Wi-Fi, press and

hold the reset button on the rear of the camera for approximately

5-7 seconds in order to reset your camera.

1. On the rear of your camera is a Micro USB port. Plug the included

USB cable into this port, and connect the other end to the included

power adapter.

30-60 seconds